Investigation Of The Bond Strength Between Three Different Structure Cad/Cam Materials And Composıte Resins
Journal Title: Uluslararası Dis Hekimligi Bilimleri Dergisi - Year 2024, Vol 10, Issue 2
Abstract
Objective: To investigate the bond strength between CAD/CAM materials of three different structures and composite resins used in the repair of these materials. Material and Methods: Specimens prepared from IPS e.max CAD (Ivoclar), Cerasmart (GC), Vita Enamic (Vita Zahnfabric) CAD/CAM materials were fixed with autopolymerizing acrylic (n=10). The upper surfaces of the specimens were sanded with 600-1200 SIC sandpaper for 60 seconds. G-aenial Posterior (GC) or G-aenial Universal Flo (GC) 2-mm high was applied to the prepared CAD/CAM surfaces according to the manufacturer's recommendations. G-Multi Primer and G2 Bond Universal were used on all CAD/CAM surfaces. On all CAD/CAM surfaces, the composites were applied and polymerized using a Teflon mold. After 24 hours in the incubator, shear bond strength tests were performed on all prepared specimens. Fracture types were determined by examining at the sample surfaces under a stereomicroscope. Failure types were classified and recorded as adhesive, cohesive and mix. Data were analyzed with one way Analysis of Variance (ANOVA) and Tukey HSD tests (p< .05). Fracture types were evaluated using the Chi-square test. Results: Both composite materials exhibited similar bond strength values to Vita Enamic and Cerasmart, whereas lower bond strength values to IPS e.max CAD. Generally, adhesive type fractures were observed in IPS e.max CAD material, and cohesive type fractures were observed in Vita Enamic and Cerasmart materials. Conclusion: : Composite materials bonded to Cerasmart and Vita Enamic, which are resin-based CAD/CAM materials, with high values, whereas they bonded to IPS e.max CAD with lower values.
Authors and Affiliations
Rümeysa Angın , Neslihan Tekçe
Keywords
Related Articles
- EP ID EP743566
- DOI https://doi.org/10.21306/dishekimligi.1300414
- Views 35
- Downloads 0
Renklenmiş Anterior Dişlerde Estetiğin Walking Bleach Tekniği ile Yeniden Kazandırılması: Vaka Serisi
Çoğunlukla anterior bölgede oluşan devital diş renklenmeleri önemli estetik problemler oluşturmaktadır. Devital diş renklenmelerine başlıca travma, pulpa nekrozu ve endodontik tedavi sonrası pulpa odasından temizlenemeye...
Using of CAD-CAM In Minimal Invasive Prosthetic Treatments: Two Case Reports
The restorative treatment of coronal losses occurring in hard tissues such as decay, wear, and fractures may not always be feasible with direct restorative methods using amalgam or composite resins. In the prosthetic reh...
ÇOCUK HASTALARIN DİŞ HEKİMİNE BAŞVURU NEDENLERİ
Objective: Our aim in this study is to understand which treatment needs and conditions are effective in children's application to the dentist. Materials and Method: Parents of 435 children who applied to Bolu Abant İzz...
Treatment Of Isolated Gingival Recessıon In The Anterior Region Of The Mandible With A Combination Of Pinhole Surgical Technique and Lateral Tunnel Technique: A Case Report
Gingival recession is characterized by the apical migration of the gingival margin, leading to the exposure of the root surface. Although its etiology is not fully understood, several factors are acknowledged, including...
Intraoral Scanners In Completely Edentulous Jaws: Review
Aim: In recent years, with the developments in intraoral scanners, studies on the precise recording of digital measurements of hard and soft tissues of completely edentulous patients have increased. The purpose of this r...