INVESTIGATION OF THE STRENGTH OF RUBBER CONCRETE ON THE BASIS OF MODEL OF THE SPECIFIC AREA OF FINE AGGREGATE
Journal Title: Вісник Національного Авіаційного Університету - Year 2018, Vol 77, Issue 4
Abstract
Based on the microscopic analysis of a large amount of rubber cement mortar, a mathematical model was established to qualitatively analyze the specific surface area of the rubber powder-sand mixed with fine aggregate. On the basis of the mechanisms of the influence of the methods of mixing the rubber powder, the size of the particles (rubber powders with a particle size of 20 mesh, 60 mesh, 80 mesh and 120 mesh were used - only 4 species, for testing the resistance of the concrete to the compression), etc., on the specific surface of the adhesion of the fine aggregate with rubber powder, the scientific explanation of the logical differences existing in the process of previous studies of rubber concrete has been given, the in-depth study of the influence of methods and mixing parameters, particle sizes and other factors on the resistance of concrete to compression ha s been carried out. The results show that the negative effect of replacing a fine aggregate of concrete with the same volume of rubber powder on the strength of concrete is much less than the negative impact on the strength of concrete rubber powder mixed with concrete. The size of particles in 60 mesh is a turning point, because the strength of the concrete for compression in the process of reducing the diameter initially decreases, and then increases. The main reason lies in the fact that the specific surface of the mutual contact of rubber particles in concrete is changing. In this paper, with the help of a large number of experimental studies, on the basis of the method of "model of determination of concrete surface area", which uses the coefficient of contact between the rubber mixture and the fine aggregate, an additional study and a deep study of mechanisms of influence on rubber concrete have been carried out.
Authors and Affiliations
He Yulin, Andrii Bieliatynskyi, Valerii Pershakov, Olexandr Dubik
Keywords
Related Articles
- EP ID EP511114
- DOI 10.18372/2306-1472.77.13497
- Views 108
- Downloads 0
MATHEMATICAL MODEL OF UNMANNED AERIAL VEHICLE CONTROL IN SINGLE CONTROL CHANNEL
The main aim of this research is development of the mathematical model. Developed model will allow deeper, qualitative and faster selection of the proper values of coefficients that are necessary for optimal and effectiv...
A NEW METHOD OF UNIFIED PROCESSING OF THE INFORMATION, REFERRED IN THE FORM OF THE THREE-DIMENSIONAL ASSOCIATIVE-LOGICAL STRUCTURE FOR OPTIMIZATION OF THE MULTIROTOR UNMANED AVIATION SYSTEM
Purpose: This article presents a mathematical model and a new way of unified information processing. Methods: Three-dimensional associative-logical synthesis. Results: Obtained a new experimental data. Discussion: The pr...
ELEARNING DEVELOPMENT
Distance Learning is one of the basic components of educational process now. eLearning technology has been rapidly developing today that may e ffect on existing resources and has to be hardly discussed in the developm...
FACTORS OF LOGISTICS AND FORWARDING SERVICE FORMATION AND DEVELOPMENT
Purpose: Forwarding service is a key part of the system of goods movement and as such it provides realization of numerous services. Providing of new additional and unconventional services to cargo ow...
STRATEGY OF SPAСE DEBRIS TREATMENT
Purpose and Objectives of the Work: this scientific article is devoted to space debris management issues. The aim of this scientific investigati on is assessment of the protection methods f...