Investigation of the use of impregnating formulation with propolis extract and organosilanes in wood protection – chemical analyses. Part I: FTIR and EA analyses
Journal Title: Annals of WULS, Forestry and Wood Technology; Zeszyty naukowe SGGW - Year 2016, Vol 96, Issue 1
Abstract
Investigation of the use of impregnating formulation with propolis extract and organosilanes in wood protection – chemical analyses. Part I: FTIR and EA analyses.The paper presents the first part of chemical results: structural changes in treated wood exposed to C. puteana using Fourier Transform Infrared Spectroscopy (FTIR) and comparison the elemental composition of treated wood before and after exposure to the analysed fungus. Slight differences in nitrogen, carbon, hydrogen and oxygen contents recorded in wood samples following impregnation, leaching and exposure to fungal degradation, confirm the permanent character of bonding between the formulation and wood. The stable character of Si-C and Si-O bonds was shown in IR spectra and discussed in this paper. Keywords:
Authors and Affiliations
WOŹNIAK MAGDALENA, RATAJCZAK IZABELA, KINGA SZENTNER, IWONA RISSMANN, GRZEGORZ COFTA
Investigation of the use of impregnating formulation with propolis extract and organosilanes in wood protection – chemical analyses. Part I: FTIR and EA analyses
Investigation of the use of impregnating formulation with propolis extract and organosilanes in wood protection – chemical analyses. Part I: FTIR and EA analyses.The paper presents the first part of chemical results: str...
„Neue Physikotheologie“ – Ein Beitrag zur Geschichte der Natur am Beispiel der Bäume
Neue Physikotheologie. Ein Beitrag zur Geschichte der Natur am Beispiel der Bäume. In dem Artikel wurden die deutschsprachigen Beiträge dargestellt, die die Entwicklung der Kenntnisse über Bäume, wie Anatomie der Holzgew...
Исследования эффекта усиления минерального основания для деревянных полов посредством шлифования и грунтования.
Исследования эффекта усиления минерального основания для деревянных полов посредством шлифования и грунтования. На долговечность деревянных полов влияет много факторов, среди них важное значение имеет прочность минераль...
Cutting power estimation of the bandsawing process of beech wood (Fagus sylvatica L.) dried in three operating modes
Cutting power estimation of the bandsawing process of beech wood (Fagus sylvatica L.) dried in three operating modes. In this paper the predicted values of cutting power for bandsawing machine (ST100R, f. Stenner), which...
Standards in design and realisation of timber structures: PN-EN 338, PN-EN 14081-1 and PN-EN 15497
Standards in design and realisation of timber structures: PN-EN 338, PN-EN 14081-1 and PN-EN15497. This paper is to present scope and differences between PN-EN 14081-1 and PN-EN 15497:2014 with special attention on desig...