INVESTIGATIONS OF RESISTANCE TO ABRASIVE WEAR OF SELECTED ENGINEERING POLYMERS
Journal Title: Tribologia - Year 2012, Vol 244, Issue 4
Abstract
The paper presents the results of comparative studies of abrasive wear resistance of selected engineering polymers: PA6, PEEK, PEI, PET, PSU. The study used a research position Tester T-07. The research testing stand Tester T-07 was used for a study. The study was conducted in the presence of loose abrasive, which was the F90 corundum, while maintaining the same friction conditions for all tested materials. In order to clarify the causes of various abrasive wear resistance of investigated polymers, the testing of microhardness of friction surfaces before and after abrasion was conducted, and the attempt to link abrasive wear resistance of various polymers with their fundamental strength properties was also done.
Authors and Affiliations
Dymitry Capanidis, Andrzej Tański
Keywords
Related Articles
- EP ID EP270422
- DOI -
- Views 39
- Downloads 0
ZALEŻNOŚĆ NAPRĘŻENIA STYCZNEGO OD CZASU ŚCINANIA WYBRANYCH KOMPOZYCJI SMAROWYCH
W pracy przedstawiono wyniki badań nad wpływem wypełniaczy wprowadzanych do smarów plastycznych na zmianę wartości naprężenia stycznego powstałych kompozycji smarowych. Wypełniaczami tymi były proszki grafitu, dwusiarczk...
Wpływ adsorpcji i temperatury na właściwości tribologiczne kompozytowych powłok Ni-P-Al2O3
W artykule poddano analizie wpływ zjawiska adsorpcji i temperatury węzła tarcia na właściwości tribologiczne powłok kompozytowych. Powłoki metalowo-ceramiczne typu Ni-P-Al2O3 wytwarzano sposobem bezprądowym na elementach...
LUBRICATING OIL INFLUENCE ON FATIGUE STRENGTH OF BEARING ALLOYS
An influence of three kinds of lubricating oils on the fatigue strength of a slide layer made of AlSn11Cu1,2 bearing alloy has been investigated under conditions of various values of temperature and loading ratio κ. Obje...
TESTING A PROTOTYPE FRICTION DRIVE TRANSMISSION
The article presents research on the mechanical properties of a drive system using an innovative mechanism converting rotary motion to progressive motion. The operating principle of the mechanism uses the friction-based...
FIELD TESTS OF RESISTANCE TO ABRASIVE WEAR OF PLOUGHSHARES MADE OF BORON STEEL
The results of the investigation of durability and ploughshare wear made from three grades of boron steel, Hardox 500, B27 and used by Lemken Company, are presented. During the research, ploughing on sandy soils was done...