Laboratory evaluation of shear bond strength of porcelain repair methods

Journal Title: Caspian Journal of Dental Research - Year 2012, Vol 1, Issue 1

Abstract

Introduction: Porcelain fracture is a relatively common problem in clinical dental practice. Various methods have been proposed for repairing porcelain fractures including direct composite resin repair or construction of a porcelain laminate veneer and its cementation with a resin cement. Evaluation of shear bond strength of porcelain repair methods was the purpose of this study. Methods: Twenty feldspathic porcelain discs (10 mm in diameter) were fabricated. The samples underwent air-born abrasion with an aluminum oxide and etching with HF, and were then ultrasonically cleaned and randomized into two groups: 1- repair with porcelain disc (7 mm in diameter) with light cure cement (Choice 2); and 2- repair with resin composite (Clearfil AP-X). We measured the shear bond strength of the samples by Zwick Roll at 0.5 mm/min crosshead speed. Results: The resin composite group had the highest shear bond strength (12.91 MPa). We found no significant differences between the choice and composite groups (p=0.970). Conclusions: Our findings indicate that resin composite yields acceptable shear bond strength to be used in porcelain repair.

Authors and Affiliations

Abdolhamid Alhavaz, Vahid Soltankarimi, Pouya Aslani

Keywords

Related Articles

Comparison of teeth discolorations induced by Mineral trioxide aggregate, Calcium-enriched mixture and Biodentine sing spectrophotometric analysis

Introduction: Most of the materials used in endodontic procedures may lead to discoloration.This study compared the discolorations induced following treatment by MTA, CEM ,and Biodentine using a spectrophotometric analys...

Reliability and validity of the persian version of the General Oral Health Assessment Index (GOHAI)

Introduction: As the oral health related quality of life has been important in many dental patients GOHAI is an acceptable tool, preparing its Persian version can be useful in oral health research among Persian populatio...

Use of palatally inserted mini-screw for upper molar distalization: A case series

Reports have shown that molars can be distalized successfully with virtually no orthodontic anchorage loss with an intraosseous anchorage, even with fully erupted second molars. The purpose of this study was evaluating t...

Epidemiological aspects of head and neck cancers in a population of south east region of Iran

Introduction: The geographical distribution of head and neck cancer shows considerable variation and it is site dependent. The review of the literature shows few data concerning the head and neck cancer patterns in Iran....

Knowledge and practices concerning the effects of ionizing radiation and x-ray protection methods in dental offices in Babol, 2013

Introduction: As the absorption of radiation in environment is increasing, the present study was performed to evaluate the knowledge and practices of Babol’s dentists about x-ray protection. Materials &Methods: This cros...

Download PDF file
  • EP ID EP177589
  • DOI -
  • Views 138
  • Downloads 0

How To Cite

Abdolhamid Alhavaz, Vahid Soltankarimi, Pouya Aslani (2012). Laboratory evaluation of shear bond strength of porcelain repair methods. Caspian Journal of Dental Research, 1(1), 14-18. https://europub.co.uk./articles/-A-177589