Laser + MAG Hybrid Welding of Various Joints
Journal Title: Biuletyn Instytutu Spawalnictwa - Year 2017, Vol 61, Issue 1
Abstract
The article presents the possibilities of hybrid welding (laser + MAG arc), particularly as regards the welding of butt joints. The article discusses technological conditions and equipment configurations when welding sheets having the same and different thicknesses both in PA and PC positions. In addition, the article presents exemplary welding of multipart joints (nodes of three sheets) and angle joints using the hybrid method as well as the possibilities of combining the HLAW method with other methods.
Authors and Affiliations
Marek Banasik, Michał Urbańczyk
Keywords
Related Articles
- EP ID EP261647
- DOI 10.17729/ebis.2017.1/1
- Views 46
- Downloads 0
Control of mechanical properties for high strength steels through optimized welding processes
The cooling time between 800°C and 500°C, is a crucial factor which determines the properties of welding joints of high strength steels significantly. For field welding, the cooling time t8/5 can be steered by the heat i...
A New Look at the Classification of Cracks in Welded and Braze Welded Joints
The making of structures using advanced materials and joining technologies is frequently accompanied by limited weldability problems. The obtainability of joints characterised by required properties can be limited, among...
Welding in Vibration Conditions – Critical Approach
Vibratory stabilisation has been used in production practice for a relatively long time now. The use of vibratory stabilisation provides technical and economic advantages where high dimensional stability of welded struct...
Welding of (Super) Duplex Stainless Steel
The article presents and describes in detail duplex steels used in modern sectors of industry (duplex, super duplex, lean duplex and hyper duplex), with particular attention paid to corrosion resistance and primary areas...
Verification of Properties of Joints Made of Advances High Strength Steels in the Conditions of the Complex Thermal Cycles of the HPAW Process
The article discusses the primary issue related to the verification of properties of joints made in AHSS in relation to conventional structural steels and based on the identification of cooling time t8/5. The solution su...