LEAN MANUFACTURING PROCESS PLANNING FOR 5 AXES CNC DRIVEN MILLING MACHINE
Journal Title: Journal of Technology and Exploitation in Mechanical Engineering - Year 2018, Vol 4, Issue 1
Abstract
The aim of this publication is to determine the OEE (Overall Equipment Efficiency) indicator for 5 axes milling machine found at Diehl Aircabin Hungary Ltd. for the present and future state. Based on this value, the utilization of the machine for the given production amount can be calculated. With the optimal choice of the right production parameters (the number of cuts, feeding, depth of cut, etc.) greater productivity can be achieved i.e. the machine main time (time of cutting) will be less. The possibilities of the reduction of the machine time will be analysed and calculated. Setting of the appropriate technological parameters the machine main time could be decreased. The calculation of the machine main time will be determined for the most frequent manufacturing technologies.
Authors and Affiliations
Sándor Bodzás, Béla Krakkó
Keywords
Related Articles
- EP ID EP645893
- DOI 10.35784/jteme.89
- Views 73
- Downloads 0
CFD ANALYSIS OF THE AIR FLOW AROUND THE BLADES OF THE VERTICAL AXIS WIND TURBINE
The paper presents the results of calculations of flow around the vertical axis wind turbine. Threedimensional calculations were performed using ANSYS Fluent. They were made at steady-state conditions for...
LEAN MANUFACTURING PROCESS PLANNING FOR 5 AXES CNC DRIVEN MILLING MACHINE
The aim of this publication is to determine the OEE (Overall Equipment Efficiency) indicator for 5 axes milling machine found at Diehl Aircabin Hungary Ltd. for the present and future state. Based on this value, the util...
APPLICATION OF HYDRAULIC CIRCUIT IN MECHATRONIC SYSTEMS
This paper focuses on the calculations of basic variables of the hydrostatic circuits in the mechatronic systems. These calculations are important for machines used for forming materials by means of great...
MATERIAL BALANCE OF THE TECHNOLOGICAL PROCESS IN THE NEW FOUNDRY OF NEW FERRONIKEL IN DRENAS 2017
Experimental and industrial research of the technological process during the year 2017, including planning, is presented in this paper. That research was conducted in the new Foundry of new Ferronickel in Drenas, which i...
THE USE OF CAD PROGRAMS FOR DESIGNING SPECIAL INSTRUMENTATION IN ADHESIVE TECHNOLOGIES
The role of adhesive technology in industry has increased significantly in recent times. The need to transfer evergreater stresses while reducing the mass of devices causes difficulties in engineering. The use of dissimi...