Loss Minimization by Optimal DG Placement on Radial Distribution Network
Journal Title: International Journal for Research in Applied Science and Engineering Technology (IJRASET) - Year 2016, Vol 4, Issue 12
Abstract
With the increase in load demand and efforts to reduce distribution system losses, to increase the efficiency of the distribution system maintaining proper voltage profile and for the future expansion of the distribution network optimal distribution system planning is therefore very important and this important task must be solved in an optimal way. In this paper, IEEE-33 bus system is considered for optimally allocating the distributed generation source at some of the buses. The following effort explains that by placing distributed generation at most sensitive buses the real power losses in the system can be reduced drastically and voltage profile can also be improved. The sites for distributed generation are selected on the basis of sensitivity and the amount of real power source at that bus is decided by applying Local Search Method.
Authors and Affiliations
Nikunj Lad, Prof. Arun Pachori,
slugAnalysis of Improper Material Management Affecting Cost in Construction Projects
The paper aims to fill a void created by the absence of proper materials management on construction sites. Research has shown that construction materials accounts for 50-60% of the total cost in construction projects. F...
Variation in Seed Characteristic among Anatolian Black Pine Populations
The study was carried out on characteristics of seed collected from eight seed stand and two seed orchard populations of Anatolian black pine [Pinus nigra Arn. subsp. pallasiana. (Lamb.) Holmboe.] to estimate variation...
slug“HUMAN resource ACCOUNTING: a strategic approach to corporate excellence”
In the era of Globalization of economy, organizations are considering their employees as “Human Capital' 'Human Capital' (HC) refers to the features such as knowledge, skills, attitude, creativity, aptitude, and commitm...
Risk Assessment of Heavy Metal Toxicants in Hair Oils
The hair oils were analyzed for heavy metal poisoning using Double Beam UV-Visible spectrophotometer and AAS. The hair oils were procured from the market and analyzed for heavy metals viz. Pb, Cu, Fe, Ni, Cr, Zn and Mn....
Comparative Study of Step Index and Graded Index Fiber
Optical fibers are widely used in optical fiber communications. Optical fibers permit transmission over longer distances and at higher bandwidth (data rates) than the wire cables. Fibers are used instead of metal wires...