Macroscopic quality evaluation of lacquered steel sheets
Journal Title: Production Engineering Archives - Year 2014, Vol 0, Issue 1
Abstract
This paper deal with the evaluation of quality of lacquered sheets with different pre-treatments after corrosive loading. Samples will be divided into groups according to the type and duration corrosion loadings. After exposure to corrosive salt mist corrosion chamber, the samples will be evaluated macroscopically according to relevant standards. Low degradation after all time corrosion load was on the sample pre-treated with an alkaline degreasing in combination with a yellow chromating and the samples pre-treated with an alkaline de-greasing in combination with surface passivation. On these samples showed no loss of adhesion to the base material and the evaluation of delamination due to corrosion during loading had a low degree of degradation. Surfaces after the cross-cut test did not for both sets of sam-ples after corrosion load all times no defects in the adhesion layer.
Authors and Affiliations
Jaroslava Svobodová, Sylvia Kuśmierczak
Keywords
Related Articles
- EP ID EP165635
- DOI -
- Views 116
- Downloads 0
Brief review of german standards for quality audits in automotive production
Quality management systems (QMS) in the automotive industry have several differences in comparison with other industrial factories. Each customer has his own specific requirements, the so-called CSRs (Cus-tomer Specific...
Supplys Selection and Supply Chain Maturity - important areas of the quality production assurance
The paper pays attention to selected information focused on the key requirements and criteria used in both the conventional sup-plier selection and sustainable supplier selection processes. The authors introduce the supp...
Investigation of dynamic characteristics of the scrubber based dimensional model in the software package ANSYS
This paper deals with the mathematical modeling of the separation process in the dynamic scrubber with the generation of the model in Ansys CFX software. A model of gas flow and dispersion medium and the hydrodynamic pic...
Processing and utilization of metallurgical slags
Metallurgy and foundry industry create a huge amount of slags that are by-products in production of pig iron, steel and cast iron. Slag is produced in a very large amount in pyrometallurgical processes, and is a huge sou...
Development of road transport emission standards
Emissions from road vehicles are playing an important role in air quality which has a significant impact on human health. Pollut-ant emissions have to be precisely determined to ensure that air quality plans are designed...