Mathematical modeling of non-isothermal adsorption mass transfer in nanoporous catalysts
Journal Title: Вісник Тернопільського національного технічного університету - Year 2015, Vol 77, Issue 1
Abstract
The mathematical model of non-isothermal adsorption mass transfer in micro- and nanopores of intraparticle and interparticle spaces catalytic media, which considers effect of temperature during adsorption process, has been considered. The paper is based on the results of previously proposed bi-porous model and takes into account dependence of diffusion and flow temperature changes of environment on concentration profiles of adsorbed components in interparticle space of micro- and nano poreus of crystallites, which is a limiting factor of adsorption process. Mathematical model consists of a system of three partial differential equations, the first equation describing material balance in the interparticle space (gas phase), the second equation describing diffusion heat balance in the media and the third equation is a internal kinetic equation, which establishes connection between gas and solid phases based on the Langmuir-Hinshelwood balance equation. Solution of non-isothermal mass transfer adsorption model is built with the Laplace’s and Fourier’s integral transformations. Obtained analytical solution of model has the advantage over numerical solution due to a significant reduction in the number of iterations that is crucial for use gradients methods of identification to solve problems of kinetic parameters determination from experimental distributions. Numerical model of concentration profiles in micropores particles at different values of temperature as a function of layer thickness coordinate for different moments from the beginning of the adsorption process has been presented. Having analyzed the graphs we see that the concentrations of benzene in the middle of nanopore particles of adsorbent increases from the middle to the edge, and the value depends on the temperature. Thus for different temperatures, characteristics of concentration profiles are the same.
Authors and Affiliations
Mykhaylo Petryk
Keywords
Related Articles
- EP ID EP572088
- DOI -
- Views 49
- Downloads 0
Mathematical modeling of led radiation in the system of medical diagnostics
The use in the medical diagnosis light irritation with intensity lower than standard level leads to decreasing invasiveness and increasing resolution of bioobject response. This improves the quality of diagnosis the stat...
Mathematical modeling of non-isothermal adsorption mass transfer in nanoporous catalysts
The mathematical model of non-isothermal adsorption mass transfer in micro- and nanopores of intraparticle and interparticle spaces catalytic media, which considers effect of temperature during adsorption process, has be...
Influence of the initial deformation of the thick plate on contact interaction with parabolic punch
Calculating the strength of structural elements and mechanisms is one of the most important stages in the process of their design. Residual deformation is almost always available in the structural elements and machine pa...
Substantiation of the parameters of hydraulic overload clutch
Creation of new types of machines and mechanisms of transport and technological systems and their drives contributes to further economic development and expansion of the range, increase productivity through the introduct...
Fluid-structure interaction in free vibration analysis of pipelines
We analyze the impact of the transported fluid on the natural frequencies of a pipeline. Solution of coupled acousto-mechanical problem for straight pipe is given by the Transfer Matrix Method. The equations for junction...