MATHEMATICAL MODELING OF THE DISK OVERLAP WORK, COMPOSED OF THE PRECAST REINFORCED CONCRETE SLABS
Journal Title: Збірник наукових праць Українського державного університету залізничного транспорту - Year 2017, Vol 167, Issue 1
Abstract
We offer to construct flooring from reinforced concrete precast hollow slabs that ensures structural design of several slabs within floor slab instead of convenient beam-type structural design of separate slab within the flooring. Thus, we have quasi-contour design of operation of flooring slab. Flooring, consisting of several beam slabs within flooring cell in question, has finite bending stiffness in longitudinal direction that depends on geometrical and physical-mechanical parameters and also reinforcement of each separate slab. In transverse direction composite flooring slab has almost zero bending stiffness and bears load due to shear rigidity of the joint and torsion resistance of each slab. This arrangement reduces loads, applied to flooring slab. Represented results of calculations and their comparison by analytical and numerical methods (FEM)
Authors and Affiliations
Evgeniy Stoyanov, Anatoliy Naboka
Keywords
Related Articles
- EP ID EP215763
- DOI -
- Views 73
- Downloads 0
STUDY OF COMPREHENSIVE CHEMICAL ADDITIVES, PROVIDING A PERMEABLE ACTION ON PHYSICAL AND MECHANICAL PROPERTIES REPAIR COMPOSITION BASED BINDER SHLAKOLUZHNOHO
The article is devoted to the substantiation of the non-cement composition of penetrating action on the basis of blast furnace granulated slag and sodium silicate. The results of the investigation of the influence of the...
RESEARCH OF SURFACES OF RESPONSE OF INDEXES OF DURABILITY OF THE HAULING GEARING WITH THE DIFFERENT DEGREES OF WEAR OF PROFILES OF POINTS
The urgency of developments aimed at further improvement of repair technologies for traction gears of railway rolling stock is substantiated. As one of the promising areas of such works, studies have been made of the cha...
EFFICIENT WALL SYSTEMS FOR OBJECTS OF RAILWAY INFRASTRUCTURE
The article explores the possibility of using different wall systems on the objects of the railway infrastructure, and compares the main performance indicators with what are important to ensure the normal conditions of h...
WAYS OF OPTIMIZING THE PERIODICITY OF TECHNICAL SERVICE OF EQUIPMENT OF ELECTRIC DRIVE SYSTEMS
In the article it is shown that the optimal frequency of maintenance of systems of electric traction is determined by its reliability, as well as the average time spent on the performance of one maintenance (M). More rel...
IMPROVEMENT OF HIGH-SPEED RAILWAY TRANSPORT IN UKRAINE THROUGH USING OF TRANSPORT INTERCHANGE SYSTEMS (HUBS)
In this paper, there is a solution of actual problems with implementation in Ukraine fundamentally new model of integrated passenger transport in domestic traffic transport to provide a connection of regional and major i...