Mathematical simulation of thermal condition of a brush contact device in three-dimensional setting
Journal Title: Проблеми машинобудування - Year 2018, Vol 21, Issue 2
Abstract
A detailed review of the existing design of brush contact devices for 200 MW to 600 MW turbo-generators is performed. The peculiarities of brush contact devices working in tandem with turbo-generators of various firms are considered. The main causes of damage are indicated and the ways of development and improvement of the existing design are indicated. An analysis of the methods of calculating heat releases in a brush contact device caused by heat releases of different nature was performed. The most optimal variant of estimation of the influence of a contact spot and quality of brushes on the value of heat releases is specified. The possibility of performing a three-dimensional computation, using the results of the analytical computation together with the CFD method, is shown. For the first time, a computation was performed and an improved method was developed for determining the thermal state of a brush contact device for high and medium-power turbo-generators. It is shown that the temperature values obtained as a result of simulating the thermal state of a brush contact device in the SolidWorks Flow Simulation environment meet the requirements for newly designed electric machines. As criteria for the convergence of the solution, the following values for volume were chosen: minimum, average, and maximum static pressure, average mass flow rate; average heat flux on the indicated surfaces. The calculation was performed until the convergence criterion was reached and at least three purges of the computation area were executed. The calculated error does not exceed the measuring error, which makes it possible to evaluate the operability of a brush contact device at the design stages, and the values obtained do not exceed the maximum permissible temperatures in accordance with the requirements of the normative and technical documentation.
Authors and Affiliations
O. V. Tretiak
Keywords
Related Articles
- EP ID EP622069
- DOI 10.15407/pmach2018.02.019
- Views 86
- Downloads 0
Shear Modulus of a Fiber Composite with a Transtropic Viscolelastic Matrix and Transtropic Elastic Fiber
When solving the problems of deformation solid mechanics, the inhomogeneous composite material is modeled as homogeneous, with averaged mechanical properties − effective characteristics. The purpose of this paper is to d...
Heat Transfer During Subcooled Boiling in Tubes (A Review)
This article provides a review of the correlations and models for determining the intensity of heat transfer during subcooled boiling in pipes. As a rule, correlations are based on dimensionless similarity numbers, while...
Dynamic Processes During the Through-plastic-damper Shock Interaction of Rocket Fairing Separation System Components
This article deals with the actual issues of ensuring the dynamic strength of rocketry components using pyrotechnics. It studies the shock interaction of rocket fairing pyrotechnic separation system components during the...
Prospects of Using Hydrogen Microaddition to Improve Diesel Engine Ecological Indicators
The problem of environmental degradation in megapolises, particularly because of the toxicity of the exhaust gases of transport engines, requires an integrated solution. The peculiarity of the processes of mixture format...
Use of Computer Technology in Modernization of Head Covers for ПЛ 20-В-500 Kaplan Turbines
<p class="a">One of the problems faced by a designer in the modernization of operating generating units is the analysis of the feasibility of ensuring the strength and reliability of turbine parts and components in their...