Measurement of BTEX (benzene, toluene, ethylbenzene and xylene) concentration at gas stations
Journal Title: Environmental Health Engineering and Management Journal - Year 2022, Vol 9, Issue 1
Abstract
Background: Fuel stations are one of the major sources of air pollution with volatile organic compounds, especially the four main petrol compounds benzene, toluene, ethylbenzene, and xylene (BTEX). BTEX in gasoline enters the air of gas stations due to high evaporation of gasoline. Therefore, determining the concentration of these compounds in gas stations in crowded and busy cities is one of the important priorities of environmental health, which is doubly important in terms of its negative effects on health. Methods: In this descriptive cross-sectional study, a total of 39 samples were collected from 13 gas stations. Sampling was performed in autumn 2018 in three working shifts (morning, noon, and night). The method NIOSH-1501 (i.e., using charcoal sorbent tubes and SKC pump with a flow rate of 0.2 L/min) was used for sampling the BTEX compounds. The mean difference and correlation of BTEX compounds based on meteorological parameters and the number of nozzles in gas stations were assessed using one-way ANOVA and correlation tests. Results: The mean and standard deviation of benzene, toluene, ethylbenzene, and xylene concentrations in the air of fuel stations were 2.784 ± 1.461, 3.495 ± 1.390, 2.091 ± 0.811, and 1.140 ± 0.419 mg/m3, respectively. The relationship between BTEX compounds and meteorological parameters such as humidity and exposure time is very important. There is a strong correlation between the concentrations of BTEX compounds. The highest correlation was observed between benzene and toluene and the lowest one was observed between benzene and xylene. In this study, no significant relationship was observed between air temperature and concentration of BTEX compounds, but there was a relationship between relative humidity and the concentration of BTEX compounds. Conclusion: The average benzene concentration in the air at the fuel stations was about 5.5 times the standard limit. Authorities should improve fuel quality and reduce its evaporation through engineering measures to overcome the issue.
Authors and Affiliations
Ahmad Allahabady,Zabihollah Yousefi,Reza Ali Mohammadpour Tahamtan,Zohre Payandeh Sharif,
A survey on air pollutant PM2.5 prediction using random forest model
Background: One of the most critical contributors to air pollution is particulate matter (PM2.5) that its acute or chronic exposure causes serious health effects to human. Accurate forecasting of PM2.5 concentration is...
COVID-19 control management in central corona hospitals using SWOT and QSPM matrices: A case study in Kashan central hospitals
Background: During the COVID-19 pandemic, hospitals have been the most important centers for the virus spread. Therefore, this study aimed to evaluate the management of infection control in central corona hospitals in Ka...
Measurement of ampicillin and penicillin G antibiotics in wastewater treatment plants during the COVID-19 pandemic: A case study in Isfahan
Background: In recent years, the world has faced with the COVID-19 pandemic, followed by a significant increase in the use of antibiotics to control the COVID-19 and other secondary infections. The nonbiodegradable cha...
Health sector’s flood response plan: A comprehensive review
Background: Floods are the most common natural disaster which may have substantial impacts on the human health and life and the environment. In recent years, Iran have faced many floods and it seems that increasing imp...
Photocatalytic removal of xylene as a pollutant in the air using ZnO-activated carbon, TiO2-activated carbon, and TiO2/ZnOactivated carbon nanocomposites
Background: Today, advances in different areas of science and technology along with their application in industries have led to an increase in dangerous pollutants which can resist biodegradation. Volatile organic comp...