Mechanical and Tribological Characteristics of TIG Hardfaced Dispersive Layer by Reinforced with Particles Extruded Aluminium
Journal Title: Tribology in Industry - Year 2017, Vol 39, Issue 1
Abstract
The article presents the results of the implemented technology for generation of hardfaced dispersive layers obtained by additive material containing reinforcing phase of non-metal particles. The wear resistant coatings are deposited on pure aluminium metal matrix by shielded gas metal-arc welding applying tungsten inert gas (TIG) with extruded aluminium wire reinforced by particles as additive material. Wire filler is produced by extrusion of a pack containing metalized and plated by flux micro/nano SiC particles. The metalized particles implanting in the metal matrix and its dispersive hardfacing are realized by solid-state welding under conditions of hot plastic deformation. Tribological characteristics are studied of the hardfaced layers of dispersive reinforced material on pure aluminium metal matrix with and without flux. Hardness profiles of the hardfaced layers are determined by nanoindentation. The surface layers are studied by means of Scanning Electron Microscopy (SEM) and Energy Dispersive X-ray (EDX) analysis. Increase by 15-31 % of the wear resistance of the hardfaced layers and 30-40 % of their hardness was found, which is due to the implanted in the layer reinforcing phase of metalized micro/nano SiC particles.
Authors and Affiliations
R. Dimitrova, M. Kandeva, V. Kamburov
Keywords
Related Articles
- EP ID EP228694
- DOI 10.24874/ti.2017.39.01.02
- Views 72
- Downloads 0
Effects of Fiber Fraction on the Mechanical and Abrasion Properties of Treated Cow Hair Fiber Reinforced Polyester Composites
Fiber reinforced polyester composites were developed by reinforcing polyester resin with Cow hair fibers obtained from the tail of Zebu breed cattle in Nigeria. Composites were fabricated using hand lay-up techniques in...
Effect of Heat Treatment on the Abrasive Wear Behavior of High Chromium Iron under Dry Sliding Condition
The effect of heat treatment on the abrasive wear behavior of high chromium cast iron (NF253AHT) under dry sliding condition has been investigated. Rectangular cross sectioned samples of the alloy were produced by sand c...
Tribological and Electrochemical Properties of AISI D3 Steel Coated with Hafnium Carbon Nitride
In this research work, hafnium carbonitride (HfCN) coatings were developed via physical vapor deposition with the aim to determine the electrochemical behavior of the HfCN layers on industrial steel substrates. The HfCN...
Improve Simulation of Plain Bearings in Dry and Mixed Lubrication Regime by Defining Locally Resolved Dry Friction Coefficients
Asperity friction is a main indicator for wear and heat conduction [1]. It occurs when thickness of oil film shrinks due to high load or slow speed. Friction is scientifically well known as long as it is dominated by la...
Tribological and Thermal Investigation of Modified Hot Stamping Tools
Direct hot stamping is an established manufacturing process to produce safety-relevant car body components, while t-he hot blank is formed and quenched simultaneously in a water cooled press. In order to protect the semi...