Mechanics of Forming Ring Disks
Journal Title: Հայաստանի գիտությունների ազգային ակադեմիայի տեղեկագիր․ Մեխանիկա - Year 2010, Vol 63, Issue 4
Abstract
The analysis of forming ring disk of constant thickness in conditions of large plastic deformations taking into account the interconnected change of effective strain and deformation hardening is carried out. The analytical dependences characterizing the relative size of plastic area are obtained. The interrelation between the initial and final form of a product is established at maximum possible size of internal pressure.
Authors and Affiliations
Roland Avakyan, Mileta Arakelyan, Ernest Nazaryan, Mohammad Kahrizi
Keywords
Related Articles
- EP ID EP602116
- DOI -
- Views 73
- Downloads 0
The contact problem for a wedge region which verges are pressing with symmetric located finite beams emerging on the peak of the wedge.
c
The penetration in ponderable fluid of a thin cone passing into a thin cylinder.
c
The problem on diffraction of a strong magnetogasdynamic shock wave at a wedge.
c
The investigation of anisotropy of cohcrete creep under small cyclic compressive load.
c
The stability of the plate with equality critical stresses
On an initially homogeneous stress state, existing the various cases of boundary conditions for which the same critical forces are obtained. However, in the article is considered nonhomogeneous initial stress states for...