METHOD OF ALIGNING THE LURCHES OF OBJECTS WITH LARGE-SIZED FOUNDATIONS AND INCREASED LOADS ON THEM

Journal Title: Periódico Tchê Química - Year 2018, Vol 15, Issue 0

Abstract

The basic scheme for calculating the bottoms of large-sized foundations is at present a scheme of a linearly deformed layer of finite thickness. A large operational experience and the results of long-term observations for the subsidence of the foundations show that the actual subsidence of the foundations turned out to be much larger than the calculated values determined by the subsidence of the foundations calculation formula based on the theory of this model. The material of the actual subsidence of the constructed objects on large-sized foundations under increased loads shows that the subsidence curves consist of linear and nonlinear sections. Then the settlement speed decreases and the stabilization stage begins. The linear section of the subsidence graph characterizes the process of soil compaction. The increase in settlement speed in a nonlinear section should be explained by the increase in the role of horizontal displacements in the general deformation of the bottom. The fact that horizontal displacements play a significant role in the overall subsidence of the structure is confirmed by numerous studies of the bottoms under reservoirs and embankments and in small-scale experiments. The account of horizontal displacement allows you to maximize the actual precipitation to the calculated ones.

Authors and Affiliations

Keywords

Related Articles

REVIEW OF CONTAMINATION IN CEMETERY SOIL BY CEMETERY SLURRY

The cemeteries have been present in the culture for many centuries. However, knowledge of the potential that is reported to contaminate the environment is more recent. Substances generated in the decomposition of human b...

ELECTRONIC POLARIZABILITIES OF DIHYDRATED URANYL ACETATE UO2(H3CCOO)2.2H2O IN AQUEOUS SOLUTION

Electronic studies in molecular systems have been used to evaluate the possibility of improvements in the efficiency of physicochemical processes of interest in electronic devices. We have studied complex molecular syste...

PHYSICAL AND CHEMICAL CHARACTERIZATION OF HONEY BEES OF SOME MUNICIPALITIES OF STATE RORAIMA

The objective of this study was to characterize, through the physical-chemical parameters: pH, density, refractive index, moisture, total acidity, electrical conductivity, Lund test and ash, 20 honey bee samples from som...

SENSITIZATION STUDY IN FRICTION STIR WELDS OF INCONEL® 625

The new challenges of the oil and gas industry require noble materials with chemical stability and greater mechanical properties. Alloy 625, popularly known as Inconel® 625, is used as a cladding material for pipelines a...

PHOTOTHERMAL TECHNIQUE FOR MEASURING THERMAL CONDUCTIVITY AND DIFFUSIVITY OF NANOFLUIDS: A NEW APPROACH

Nanofluids have become nowadays of special importance because of their different uses in industry, therefore, to propose methods to calculate their thermal properties would be useful. In this work, a new variant for the...

Download PDF file
  • EP ID EP502958
  • DOI -
  • Views 203
  • Downloads 0

How To Cite

(2018). METHOD OF ALIGNING THE LURCHES OF OBJECTS WITH LARGE-SIZED FOUNDATIONS AND INCREASED LOADS ON THEM. Periódico Tchê Química, 15(0), 1-11. https://europub.co.uk./articles/-A-502958