Method of analysis errors of measuring conversion of impedance spectroscopy with activation nonharmonic signals

Abstract

In this paper, we examine the peculiarities of SPICE simulation measuring transducers impedance spectroscopy. Based on results of modeling research proposed the method of analysis errors measured values of active and reactive impedance component, which based on a comparison of small-signal AC analysis and Transient analysis. During AC analysis received impedance Nyquist plot in the idealized case and in the Transient analysis calculated value active ReẐ and reactive ImẐ impedance components for actual parameters of measuring transducers, including forms of activating signals. Implementation of this approach is done by synchronous detection output signals and the integration results in the detection time intervals that fit their active and reactive components.

Authors and Affiliations

Grygoriy Barylo, Roman Holyaka, Volodymyr Virt, Fedir Vezyr

Keywords

Related Articles

Corrosion fetigue features of carbon 35 (0.35c) steel in presence of oak chips extract

It is established that corrosion protection efficiency of medium carbon steel in water inhibited by oak chip extract grows with increasing of inhibitor concentration. The degree of corrosion protection reaches 85 – 97% u...

Automated system for irradiation of biologically active points of the human body

The automated system for the control of the absorbed energy dose of laser irradiation in the frequency range of modulation is developed and proposed.The possibility of choosing radiation frequencies with the maximum abso...

Influence of the cutting direction of Charpy specimens from steel 10GN2MFA on the components of the fracture energy and the ductile-to-brittle transition temperature

The Charpy specimens impact tests are one of more simple and inexpensive methods to determine the mechanical properties of materials. The results of these tests can be used to estimate the strength and durability of larg...

Compressive and tensile strength of reinforced сoncrete with basalt fiber

Nowadays the more often usage of concrete under extreme operating conditions requires invariably improvement of its properties such as: crack, frost, shock resistance and resistance before dynamic loads. It can be realis...

Main principles of «conditional mechanism» design

The article is devoted to the problem of existence of systems of specific spatial mechanisms, which, in contrast to traditional mechanisms intended for putting into motion and moving of various machines or their integral...

Download PDF file
  • EP ID EP257710
  • DOI -
  • Views 58
  • Downloads 0

How To Cite

Grygoriy Barylo, Roman Holyaka, Volodymyr Virt, Fedir Vezyr (2017). Method of analysis errors of measuring conversion of impedance spectroscopy with activation nonharmonic signals. Вісник Тернопільського національного технічного університету, 86(2), 108-116. https://europub.co.uk./articles/-A-257710