Methodology for the experimental research of reinforced cylindrical shell forced oscillations
Journal Title: Вісник Тернопільського національного технічного університету - Year 2017, Vol 86, Issue 2
Abstract
In the paper the methodology for experimental studies of forced oscillations of a horizontally oriented cylindrical shell which is reinforced from the inside by stringers and bulkheads using the servo-hydraulic test machine STM-100 is developed.
Authors and Affiliations
Petro Yasniy, Yuriy Pyndus, Mykhailo Hud
Keywords
Related Articles
- EP ID EP257698
- DOI -
- Views 45
- Downloads 0
Integral equations for an thermoelastic anisotropic bimaterial with high temperature-conducting coherent interface
This paper studies the problem of an thermoelastic anisotropic bimaterial with highly conducting interface containing thin inclusions. Using the modified boundary element approach, the extended Stroh formalism and comple...
Hydrogen wear resistance under the metal-polymer friction pairs operation
The results of studies of labyrinth seals made of composite materials on the basis of aromatic polyamide phenylon reinforced by copper-carbon fiber are presented. It is shown that in this case a selective transfer with f...
Modification of drive roller chain link plates
The article deals with the problem of effect assessment on strain-stress state of drive roller chain link plates, their shapes and dimensions. It is noticed that decrease of strain concentration in plates cross-section d...
Longitudinal shear of bi-material with interfacial crack considering friction
The present paper investigates the anti-plane problem for a semi-homogeneous bi-material with the closed interface crack considering sliding friction. Solid is exposed to the combined cyclic loading in the longitudinal d...
Investigation of the influence of boundary conditions and degradation factor of the surface layer on the GTE structural elements stress-strain state
The influence of the boundary conditions of the nonstationary thermal cyclic loading and degradation of the material surface layers on the stress-strain state of the material of the wedge-shaped specimens, which model th...