METHODOLOGY OF CONDUCTING THE SIMULATION OF MUTUAL COOPERATION OF ACTUAL SURFACES DURING THE DRY FRICTION PROCESS
Journal Title: Tribologia - Year 2012, Vol 244, Issue 4
Abstract
The paper presents a methodology of actual surface model creation and cooperation simulations. Various stages of research are presented, including the measurement in 3D of surface geometrical structures by converting the received points cloud into a solid in CATIA, to an FEM simulation of mutual surface displacement in Abaqus. Sample stress distributions were obtained on irregularities included in mutual contact during the dry friction process.
Authors and Affiliations
Henryk Czarnecki, Michał Tagowski
Keywords
Related Articles
- EP ID EP270428
- DOI -
- Views 50
- Downloads 0
APPLICATION OF A LINEAR WEAR INDICATOR IN THE ASSESSMENT OF RESISTANCE TO ABRASIVE WEAR OF PLOUGHSHARES AND CHISELS
The aim of this work is to present a method of assessing resistance to abrasive wear of ploughshares and chisels using a linear wear indicator that is called “a unit of local changes in the contour.” This indicator is cr...
PRESSURE AND VELOCITY DISTRIBUTION IN A SLIDE JOURNAL BEARING GAP BY LAMINAR UNSTEADY LUBRICATION
This paper shows the results of numerical solutions of modified Reynolds equations for laminar unsteady oil flow in the slide journal-bearing gap. Laminar unsteady oil flow is performed during periodic and non-periodic p...
INNOWACYJNA TECHNOLOGIA WYTWARZANIA WARSTW PRZECIWZUŻYCIOWYCH NA NARZĘDZIA DO KUCIA NA ZIMNO
Narzędzia do kucia na zimno poddawane są bardzo dużym obciążeniom ze względu na wysokie naprężenia oraz umocnienie podczas kształtowania. W niniejszym artykule przedstawiono analizę wpływu zmiany powierzchni narzędzi z t...
INFLUENCE OF EROSIVE PARTICLES IMPACT ANGLE ON EROSIVE WEAR INTENSITY OF POLYURETHANE COATINGS
The article presents examination results of the influence of alundum particle impact angle on the kinetics of the erosive wear of polyurethane coatings. Examined three-layer polyurethane coatings of an average thickness...
Struktura geometryczna powierzchni ukonstytuowana w procesie obróbki elektroerozyjnej
Obróbka elektroerozyjna, należąca do tzw. niekonwencjonalnych metod obróbki materiałów, znalazła szerokie zastosowanie w kształtowaniu elementów wykonanych z materiałów trudnoskrawalnych oraz o złożonej geometrii. W prac...