METHODS AND DIAGNOSTIC TECHNIQUES USED TO ANALYSE THE TECHNICAL STATE OF REINFORCED CONCRETE STRUCTURES
Journal Title: Structure and Environment - Year 2018, Vol 0, Issue 4
Abstract
The paper presents the problems concerning the principles of developing expertise and performing tests on reinforced concrete structures. The situations that justify the need to provide expertise, the subject of which are constructions made of reinforced concrete, are described. A layout of the content of expertise that is usually adopted in practice has been included and commented on. The basic principles that should be followed when diagnosing the structures in question are provided. The available diagnostic methods and techniques, including non-destructive and semi non-destructive ones, are reviewed. This review is enriched with classifications that facilitate the selection of specific methods
Authors and Affiliations
Jerzy Hoła, Leonard Runkiewicz
Keywords
Related Articles
- EP ID EP535000
- DOI 10.30540/sae-2018-030
- Views 86
- Downloads 0
THE HEIGHT SURVEY OF MOUNT ŁYSICA IN THE CONTEXT OF VERIFICATION OF GEODESICAL AND CARTOGRAPHIC STUDIES
The subject of the article is the measurements of normal height (H) of the western top of Mount Łysica (Świętokrzyskie Mountains, Poland), carried out using the GNSS and geometric leveling methods according to standards...
SNOWDRIFT EXTENT ON MOTORWAYS WITH BUSY TRAFFIC
The paper examines the problem of snow-drafts on roads and ways of mitigating them. The results of theoretical analyses of development of snow-drafts and experimental investigations with road models are presented. Author...
ENERGY AND RESOURCE SAVING TECHNOLOGIES OF FORMATION OF MASSIVE AMORPHOUS STRUCTURE
The article presents the results of an experimental study of energy-resource saving technologies of formation of massive amorphous structure. Considered are the methods of mathematical modeling and optimization of proces...
TECHNOLOGICAL ASPECT OF BRICK PRODUCTION USING THE METHOD OF AUTOCLAVING
Production of sand-lime bricks using the autoclaving method is a well-known process, especially in Europe. During the autoclaving process, also called the hydrothermal treatment or hardening the materials with lime and/o...
PROCESSES MODELLING IN TWO-NAVE BUILDING WITH NATURAL AIR EXCHANGE
The paper explains ventilation air exchange driven by the gravitational force and wind, and the major factors affecting the phenomenon. A mathematical model, namely a system of equations, for computations of natural vent...