Metrological traceability of impedance parameter measurements in Ukraine
Journal Title: Восточно-Европейский журнал передовых технологий - Year 2018, Vol 4, Issue 9
Abstract
<p class="a"><span lang="EN-US">The equivalence rates of the national standard of a unit of electrical capacitance for denominations of 10 pF and 100 pF at frequencies of 1 kHz and 1.592 kHz and expanded uncertainties obtained from the results of international comparisons of national measurement standards for electrical capacitance units were established and their comparative analysis was carried out. The equivalence of the national standard of the inductance unit for the nominal values of 10 mH and 100 mH at a frequency of 1 kHz and the expanded uncertainties obtained from the results of international additional comparisons of the national measurement standards of inductance units were established and their comparative analysis was carried out. The comparisons were conducted by Regional Metrology Organizations with the participation of the National Metrology Institute of Ukraine.</span></p><p class="a"><span lang="EN-US">The analysis of the data processing methods applied in the comparison reports was carried out with the aim of adequately evaluating the results obtained by each of the comparison participants. The results of the National Metrology Institute of Ukraine became the basis for establishing the metrological traceability of measurements of impedance parameters in the country and the recognition of the results of these measurements in other countries.</span></p><p class="a"><span lang="EN-US">Values of the expanded uncertainty of the measurements of the electrical capacitance in the range of values from 10 pF to 10 nF for highprecision calibration of the measures of electrical capacitance were calculated. Values of the expanded uncertainty of inductance measurements in the range from 1 µH to 10 H with highprecision calibration of inductance measures were calculated.</span></p><p class="a"><span lang="EN-US">The best values of the expanded uncertainty of measurements of impedance parameters (electrical capacitance and inductance) in a wide range of values in Ukraine were established. The comparative analysis showed that the published data on the calibration and measurement capabilities of the national metrology institutes of Ukraine for measuring the electrical capacitance and inductance can be significantly improved in wide ranges of values.</span></p>
Authors and Affiliations
Oleh Velychko, Sergii Shevkun, Tetyana Gordiyenko, Maryna Dobrolyubova
Keywords
Related Articles
- EP ID EP528112
- DOI 10.15587/1729-4061.2018.139689
- Views 72
- Downloads 0
Development and investigation of the reduced mathematical model of the process of baking carbon products
<p class="ParaAttribute2">The development of optimal control of the process of baking carbon products involves consideration of the influence of characteristic zones of the furnace and uniformity of the temperature field...
Studying the effect of sesame flour on the technological properties of dough and bread quality
<p class="a">It has been proven that the sesame seed chemical composition when compared with wheat flour is distinguished by the larger content of mono- and polyunsaturated fatty acids, mineral substances, protein, valua...
Development of portable dc voltage calibrators with additive offsets adjusting
<p>Improvement of portable equipment for controlling the DC voltage measuring channels of cyber-physical systems at the operating sites is proposed. Additive offsets and drifts make a dominant contribution to the error o...
Influence of the duration of aging the system Ti/Al2O3 in a hydrogen atmosphere on hydrogen sorption, adhesion, tribology, and electrical conductivity of the film
This paper reports results on the interaction between an aluminum oxide film, deposited on technically pure titanium of grade VT1-0 by the magnetron reactive sputtering method, and a hydrogen-containing atmosphere. Such...
Improving energy efficiency of coal transportation by adjusting the speeds of a combine and a mine face conveyor
<span lang="EN-US">The object of this research is the process that forms the weighted specific energy consumption for the transportation of rock mass by a coal face scraper conveyor at intensive coal mining under conditi...