МЕТРОЛОГІЧНА НАДІЙНІСТЬ ТЕРМОЕЛЕКТРИЧНОГО НАНОСЕНСОРА КВАНТОВОГО ЕТАЛОНА ТЕМПЕРАТУРИ
Journal Title: Вимірювальна техніка та метрологія - Year 2018, Vol 79, Issue 2
Abstract
While studying the physical foundations of the temperature standard, we obtained a quantum unit of temperature as the value of the temperature jump when one electron-phonon scattering per unit time. We expressed it in terms of the ratio of fundamental physical constants h/kB; it is equal to 3.199 493 42 ∙ 10-11 K with a relative standard uncertainty of 59.2 ∙ 10-8. The investigated quantum standard is recommended for use as an "intrinsic standard", which does not require continuously repeated measurements (to check its accuracy) in relation to the current unit of temperature. The possibility of the introduction of standard quantum temperature requires paying significant attention to the I (current) - T (temperature) converting element as unique electronic device that is subject to significant stress during operation. Considering its nanosized dimensions, since this element is made on the basis of CNTFET by transforming it into a nanosized thermocouple (source and drain) with a superconducting CNT gate as the thermocouple junction, we foresee particularly stringent requirements for this element. The solution to this problem can be accomplished with help of elastic stress engineering, which has previously been successfully applied to scale the manufacturing processes of multigated complementary FETs. The technology of the I - T converting element of the quantum temperature standard is complicated and provided by the Cu coating (or another similar metallization) of the nanotube free ends. The negative influence of defects in the production of I - T elements, in particular electrodes of the thermoelectric nanosensor, on the quality of subsequent operations can be significant. As result, the metrological characteristics of nanosensor (drift of thermo-EMF, impact of deformation, number of operation cycles etc.) become enough unpredictable. On the basis of nanothermodynamics and elastic stress engineering we have studied the number of impact factors on thermoelectric nanosensor performance, trying to provide the reliable operation of the I - T converting element of the quantum temperature standard. At the same time, there were fulfilled a number of studies of metals, alloys, and metal glasses in various temperature-mechanical and thermodynamic modes.
Authors and Affiliations
Bohdan Stadnyk, Svyatoslav Yatsyshyn, Thomas Fröhlich, Mykola Mykyychuk, Yaroslav Lutsyk, Pylyp Skoropad
Keywords
Related Articles
- EP ID EP531571
- DOI 10.23939/istcmtm2018.02.020
- Views 62
- Downloads 0
КОМПЛЕКСНА МЕТОДИКА ПРОВЕДЕННЯ МЕТРОЛОГІЧНОЇ ЕКСПЕРТИЗИ ВІЙСЬКОВОЇ ТЕХНІКИ ЗВ’ЯЗКУ
Modern and promising examples of military communication technology belong to the most knowledge-intensive and high-tech types of industrial products, which are subject to increased requirements for quality an...
ОСОБЛИВОСТІ ПОБУДОВИ ЦИФРОВИХ РЕЗИСТИВНИХ ТЕРМОМЕТРІВ ПІДВИЩЕНОЇ ЯКОСТІ
There are described the detailed features of high quality digital resistive thermometer for three and four connecting lines of sensors. The digital thermometer structure scheme with error correction features is proposed...
УТОЧНЕНИЙ РОЗРАХУНОК НА МІЦНІСТЬ ЗАХИСНИХ ОБОЛОНОК ТЕРМОПЕРЕТВОРЮВАЧІВ ЗА УМОВ ЕКСПЛУАТАЦІЇ
Accurate evaluation of possible safe operation of thermowells essentially depends on the accuracy of the maximum stresses in them during operation. These stresses are generally determined from simple engineering formulas...
АППАРАТУРНОЕ ОБЕСПЕЧЕНИЕ ПОВЕРОЧНОЙ СХЕМЫ ДЛЯ ТЕПЛОПОТОЧНЫХ ИЗМЕРЕНИЙ
Pressing questions of heat flow taking measurement assurance, namely creation of equipment for the testing scheme reproduction and transfers of the unit size of a heat flow density are considered.
Термометричні характеристики інтерметалічного напівпровідника n-ZrNiSn, сильнолегованого акцепторною домішкою Y
The temperature and concentration dependencies of resistivity, thermopower and also power descriptions of Zr1- YxNiSn semiconductor in ranges, T = 80 ¸ 380 K and x = 0 ¸ 0,25, respectively were investigated.