Microbial removal of engine oil from polluted media (the case study: Hamadan City)
Journal Title: Journal of Advances in Environmental Health Research (JAEHR) - Year 2017, Vol 5, Issue 2
Abstract
Discharging industrial wastes into the soil causes accumulation of pollutants, especially petroleum hydrocarbons and used engine oil, in the environment. This study was done to find some bacterial strains capable of removing the engine oil from contaminated soils. Soil samples contaminated by engine oil were collected from some polluted area of Hamadan City, and then their bacterial strains were isolated and classified on the basis of morphological keys and biochemical tests. The efficiency of these bacterial strains in removing the pollutant was evaluated in minimal salt medium (MSM) containing 1% engine oil. The optical density (OD) of the media was measured as an indicator of bacterial growth and degradation of the engine oil during day 0, 5, 10, and 15 at 600 nm wavelength. The bacterial strain responsible for the highest OD was chosen as the effective one, and the efficiency of oil removing was evaluated for this bacterial strain. In this study, eight bacterial strains called EODB1-8 were isolated. The results of the OD determination showed that the four bacterial strains caused more turbidity in the samples. The effects of time, type of bacteria, and their interaction effects were also significant in all samples. The turbidity of the samples was increased with increasing exposure time. The maximum turbidity was caused by the bacterial strain EODB4 and it was introduced as the best engine oil degrading bacterial strain. Its engine oil removal efficiency was evaluated to be 62.85% and it was identified as Pseudomonas alcaligenes using morphological keys and biochemical identification methods.
Authors and Affiliations
Fariba Mohsenzadeh, Sanaz Safaie
Keywords
Related Articles
- EP ID EP425290
- DOI 10.22102/jaehr.2017.80690.1011
- Views 107
- Downloads 0
Bioaccumulation of metals in silver carp and stone moroko from Zarivar Wetland in Kurdistan Province, Iran
This research aims to monitor the trace elements content (Cr, Cu, Pb, Cd, Ag, Al, Mn, Mg, Zn and Fe) in the tissues of the muscle and liver of silver carp (H. molitrix ) and stone moroko (P. parva) from Zarivar Wetland i...
System assessment and analysis of dangers in water safety plan: a case study in a desert city in Iran in 2017
Access to clean and safe drinking water has been the focus of officialsin charge of supplying water through many different methods. Water safety program is a new method for ensuring the safety of water by applying syst...
Forecasting of heavy metals concentration in groundwater resources of Asadabad plain using artificial neural network approach
Nowadays 90% of the required water of Iran is secured with groundwater resources and forecasting of pollutants content in these resources is vital. Therefore, this research aimed to develop and employ the feedforward art...
Site selection for wastewater treatment plant using integrated fuzzy logic and multicriteria decision model: A case study in Kahak, Iran
One of the environmental issues in urban planning is finding a suitable site for constructing infrastructures such as water and wastewater treatment plants. There are numerous factors to be considered for this purpose, w...
Concentration levels of heavy metals in irrigation water and vegetables grown in peri-urban areas of Sanandaj, Iran
Concentration and daily intake (DI) of heavy metals [lead (Pb), chromium (Cr), cadmium (Cd) and copper (Cu)] were investigated in four common edible vegetables including coriander, dill, radish root and radish leaf grown...