Microstructural Characteristics of Sintered Powder Metallurgy Alloys
Journal Title: Analele Universitatii "Dunarea de Jos" din Galati. Fascicula IX, Metalurgie si Stiinta Materialelor - Year 2014, Vol 37, Issue 4
Abstract
The purpose of this paper is to study the influence of processing parameters on the microstructural characteristics of sintered powder metallurgy alloys. The specimens were produced from atomised iron powders with different sizes (<45, 45-63, 63-100, 100-150, >150 μm). They were compacted at pressures of 600 MPa and sintered for 30 minutes and 120 minutes at 1150 ºC, respectively. The porosity of the sintered samples was analyzed according to their microstructural characteristics and chemical composition.
Authors and Affiliations
Mihaela MARIN, Florentina POTECAŞU, Octavian POTECAŞU
Keywords
Related Articles
- EP ID EP584668
- DOI -
- Views 80
- Downloads 0
Influence of the Anodic Oxidation Treatment on the Corrosion Behaviour of Aluminium and Aluminium Alloys
This paper deals with the effect of anodic oxidation treatment on the corrosion behaviour of 6061 aluminium alloy in natural sea water. Anodic oxidation treatment leads to the formation of an amorphous oxide layer on the...
A New Configuration for Cast Bearing Support from the Work Roll as Part of a Thick Sheet Rolling Mill
In this work is made an optimization of configuration for casting bearing support of backup rolls, with Finite Element Method. This program is used for configuration of parts or subassemblies realized from cast iron. The...
The Study of Metal-Old Wood Interactions Under the Influence of Pedological Factors
In the manufacture of wood objects, for binding and strengthening were used nails, cramps and other metallic elements, which in the archaeological site suffered degradation and deterioration processes, specific to metal-...
The Sonic Waste Water Treatment
Sonic technology means the technology where the sonic devices are used and where the intensification of the heat and mass transfer is obtained owing to the pressure or flow capacity oscillations, introduced in the techno...
Physical-Mechanical and Technological Characteristics of Ti10Zr Alloy for Dental Applications
Progress reported over time in dentistry can be attributed largely to the dynamics of acquiring new materials. A biomaterial is considered ideal in the absence of any biomaterial-tissue interaction, which means a biomate...