Microstructure and Mechanical Properties of Hot Pressed 16.5CR Ferritic ODS Steel Developed Through Mechanical Alloying
Journal Title: International Journal of Mechanical and Production Engineering Research and Development (IJMPERD ) - Year 2018, Vol 8, Issue 2
Abstract
Two different ferritic oxide-dispersion-strengthened (ODS) steels compositions Fe–16.5Cr–0.89Mn-0.3Y2O3-2ZrO2 (Sample1) and Fe–16.5Cr–0.89Mn-0.3Y2O3-2ZrO2-2Al (Sample2) were prepared through Mechanical Alloying (MA) and X-Ray Diffraction (XRD) pattern were taken at different time intervals for confirming the Nano-crystallite size. Milled powders were consolidated at 1170OC at three different pressure levels of 30, 40 and 60 MPa respectively. Densification studies, micro-structural examination ,and mechanical properties evaluation were analyzed and reported in the current study. MA of the hot pressed powder at 60 MPa obtained the highest density, hardness ,and tensile strength compared with another pressure compact irrespective of its composition. Aluminum addition in the ferritic ODS steel lowers the density, hardness ,and elongation of the ferritic ODS steel samples
Authors and Affiliations
Keywords
Related Articles
- EP ID EP347466
- DOI 10.24247/ijmperdapr201882
- Views 75
- Downloads 0
Analysis of L-Histidinium Maleate (LHM) Characterization and Identification of Structural Arrangement
L-histidine maleate, another amino corrosive natural nonlinear optical material has been effectively developed from the fluid arrangement by moderate dissolvable dissipation technique. The developed gem was subjected to...
Fabrication of Functionally Graded Composite Material using Powder Metallurgy Route: An Overview
Functionally Graded Composite Material (FGCMs) are inhomogeneous materials, consisting of two (or more) different materials, with an engineered gradient along the thickness direction having a continuously varying spatial...
Microstructural Analysis of 316LN Austenitic Stainless Steel by Salt Bath Nitriding Process
Austenitic stainless steel 316LN was subjected to salt bath nitriding at a temperature of 565°C for a period of 60, 80, 100 and 120 minutes. Influence of case depth based on nitriding time was investigated in the present...
Review on Extended Surfaces used in Concentric Tube Heat Exchanger
Improving heat transfer in double heat exchanger has led to large number of studies. Double heat exchanger is commonly used in industries due to its simplicity; flexibility had a wide range of applications. One of the me...
Microstructure and Mechanical Properties of Hot Pressed 16.5CR Ferritic ODS Steel Developed Through Mechanical Alloying
Two different ferritic oxide-dispersion-strengthened (ODS) steels compositions Fe–16.5Cr–0.89Mn-0.3Y2O3-2ZrO2 (Sample1) and Fe–16.5Cr–0.89Mn-0.3Y2O3-2ZrO2-2Al (Sample2) were prepared through Mechanical Alloying (MA) and...