Microstructure and properties of cold sprayed composite coatings
Journal Title: Journal of Achievements in Materials and Manufacturing Engineering - Year 2017, Vol 2, Issue 81
Abstract
Purpose: The composite coatings containing incorporated ceramic achieve a wide spectrum of enhanced properties, resulting from a combination of features from a ductile matrix and hard particles. This article attempts to explain how the alumina addition to Ni powder influences the microstructure and mechanical properties of the composite Ni-Al2O3 coatings cold sprayed on the 7075 Al alloy. Design/methodology/approach: The coatings were formed during a deposition of the powder particles step by step which impacts with high velocities onto the substrate, deform, and adhere to it or to other particles. Findings: The incorporation of Al2O3 in the Ni matrix induced a larger plastic deformation of the powder particles and reduced the porosity of the coatings. The Ni-Al2O3 coatings were characterized by a lower surface roughness compared to Ni deposits. The Young modulus of the Ni-Al2O3 coatings were found to be higher than Ni coating.
Authors and Affiliations
A. Góral, W. Żórawski, M. Makrenek, S. Kowalski
Keywords
Related Articles
- EP ID EP199060
- DOI 10.5604/01.3001.0010.2037
- Views 141
- Downloads 0
Antimicrobal and ostheointegration activity of bone cement contains nanometals
Purpose: One of the major problems in bone surgery are infections – especially thoseoccurring in the course of the operating on the patients with lowered immunity system,because they carry the danger of complications. In...
Thermal stability of nanoscale oxides and carbides of W and Zr in Cu-Al-Fe alloy
Purpose: of this paper is to discover phases evolution of nanoscale tungsten, zirconium oxides and carbides during heating up to 1200°C in contact with the copper alloy CuAl8Fe3. Design/methodology/approach: The ma...
Investigation of mechanical properties of MIG-brazed DP600 steel plates using different arc voltage
Purpose: In this study, the joinability of dual-phase automotive steel sheets by metal inertgas brazing method was aimed. DP 600 (Dual Phase) steel plates having 1 mm thicknesswere joined by copper-based (CuAl8) wire in...
The analysis of strength and fracture morphology of Al-Si compound made from moulding sand formulation with bentonite binding material and Portland cement
Purpose: This research aimed to analyse the casting result of Al-Si compound used formulation of moulding sand with bentonite binding material and Portland cement. Design/methodology/approach: Bentonite bind...
Design of modernization of control valves for the counter-bending forces regulation in finishing mill
Purpose: The aim of this paper is design of modernization of control valves of finishing mill to control the counter-bending forces on the last stands by replacement of proportional valves with regulating ones. Design/me...