MICROSTRUCTURE CHANGE FOR MULTI-PASS WELDING BETWEEN AUSTENITIC STAINLESS STEEL AND CARBON STEEL
Journal Title: Journal of Mechanical Engineering Research & Developments (JMERD) - Year 2018, Vol 41, Issue 2
Abstract
The purpose of this study was to discuss the change in microstructures and hardness values in fusion zone (FZ) and heat-affected zone (HAZ) of austenitic stainless steel and carbon steel welds. By comparison, the morphology of δ – Ferrite which formed in the fusion zone of single-pass and multi-pass welding was analyzed. The columnar dendritic shape can be seen as features extending from the fusion line of a weld pass toward the subsequent passes. Furthermore, the δ-Ferrite morphology changed from fine cellular to columnar dendrite or equiaxed dendrite. The recrystallization phenomenon was only observed in the HAZ carbon steel side of multi-pass welding. This zone was divided into HAZ-1 (grain-refining region) and HAZ-2 (partial grain-refining region). The hardness values in each zone were measured with the highest value was on fusion boundary of carbon steel side. Transverse tensile was carried out.
Authors and Affiliations
T. Nhung Le, M. Khanh Pham, A. Tuan Hoang, T. N. Mai Bui, D. Nam Nguyen
Keywords
Related Articles
- EP ID EP405898
- DOI 10.26480/jmerd.02.2018.97.102
- Views 61
- Downloads 0
ENHANCEMENT OF INDUSTRIAL WASTEWATER TREATMENT PRO-CESS USING NEW GENERATION FILTERS
Natural water and wastewater is treated at public utilities and industrial facilities using filters of various designs that are filled with filtering materials containing electric-chemical sources of cur-rent. Main limit...
INVESTIGATION ON THE MECHANICAL PROPERTIES OF PLA & ITS COMPOSITE FABRICATED THROUGH ADVANCED FUSION PLASTIC MODELLING
Advanced Fusion plastic modelling (AFPM) based rapid prototyping (RP) technique was emerged as one of the potential Technologies for serving numerous three-dimensional product for tool design purposes. Primarily, Poly La...
PROPOSAL OF SOME ADVANCED TECHNOLOGY METHODS IN THE ASSEMBLY OF THE SHAFT SYSTEM – MAIN ENGINE ON THE SMALL CARGO SHIPS
In recent years, along with the strong development of science and technology, many new construction methods have been applied in the shipbuilding industry for high technical efficiency, shortening construction time and r...
INFLUENCE OF INFRASTRUCTURE CONSTRAINTS ON THE GEOMETRICAL LAYOUT OF A LONG-HAUL AIRCRAFT
The increase in the dimension of long-haul aircrafts came into conflict with modern aviation infrastructure and led to the search for alternative options for constructively layout circuit solutions in order to deal with...
MICROSTRUCTURE CHANGE FOR MULTI-PASS WELDING BETWEEN AUSTENITIC STAINLESS STEEL AND CARBON STEEL
The purpose of this study was to discuss the change in microstructures and hardness values in fusion zone (FZ) and heat-affected zone (HAZ) of austenitic stainless steel and carbon steel welds. By comparison, the morphol...