Microwave Absorption by Used Moulding and Core Sands
Journal Title: Archiwum Odlewnictwa - Year 2012, Vol 12, Issue 3
Abstract
The paper presents measurement results of standing wave ratio to be used as an efficiency indicator of microwave absorption by used moulding and core sands chosen for the microwave utilization process. The absorption measurements were made using a prototype stand of microwave slot line. Examined were five used moulding and core sands. It was demonstrated that the microwave absorption measurements can make grounds for actual microwave utilization of moulding and core sands.
Authors and Affiliations
D. Nowak, M. Stachowicz, K. Granat
Keywords
Related Articles
- EP ID EP72789
- DOI 10.2478/v10266-012-0087-9
- Views 116
- Downloads 0
Control of rebonding sand mixing as a condition for optimisation of the sand feeding system in the casting line
In order to ensure the effective operation of the casting line, synthetic sand containing bentonite has to be fed in a precisely controlled quality and quantity. The required quantity is ensured by mixing stations outfit...
Elements of the efficiency system improvement of foundry
The effectiveness of industrial systems is being ranked among important factors industrial engineering in foundry. He determines internal production abilities of foundry. It is possible to describe the effectiveness the...
Influence of cooling rate on crystallization, structure and mechanical properties of MCMgAl6Zn1 alloy
This work presents an influence of cooling rate on crystallization process, structure and mechanical properties of MCMgAl6Zn1 cast magnesium alloy. The experiments were performed using the novel Universal Metallurgical S...
Trials to manufacture and test castings from Inconel alloy
The article describes the methods of producing and testing the Inconel 740 nickel alloy in as-cast state. An assumption has been made that the obtained alloy should be characterised by a normative chemical composition an...
Fatigue damage cumulation in brass under variable loading
In the paper there was presented the course of fatigue damage cumulation in specimens made of CuZn37 brass. During the analysis the course of damage cumulation there were used parameters of hysteresis loop and microstruc...