MODEL OF ACOUSTOOPTICAL SWITCH FOR ALL OPTICAL TELECOMMUNICATION SYSTEMS
Journal Title: Вісник Національного університету "Львівська політехніка", серія "Радіоелектроніка та телекомунікації" - Year 2013, Vol 766, Issue 2013
Abstract
Optical communication using semiconductor lasers as sources and optical fiber as the transmission medium is the only solution to handle the massive growth of network traffic. A single strand of fiber offers a bandwidth of 25 000 GHz, and a cable containing about 1000 optical fibers can carry six billion simultaneous full-screen videophone conversations – one for every person on earth. To utilize the potential bandwidth available on these optical fibers, other components of the optical network system have to be developed, ranging from detectors to multiplexers, buffers and switches. This paper addresses to acoustooptical technique, which could applied to switching optical signals. In general, a switch is concerned with the routing of message information in response to supervisory control signals. The message information could be large blocks of multiplexed traffic in the optical core network or a large number of lower bit channels delivered to the users in the optical access network. However, the application of an optical switch may not just be limited to the communication networks but also will incorporated in the communication cores of a large multiprocessor computer where the data rates may exceed 100 Gbit/s. With new schemes being experimented for secure communication and for computing using quantum phenomena, new architecture will be required for switches that do not interrupt the phase information of the quantum packets. The mathematical model of optical cross-connect switch (OXC) have been presented. Given model, represent the input data stream as a matrix, each rows of which represents the incoming data stream in the form of a matrix whose rows correspond DWDM channels, and columns – wavelengths, respectively. The method of optical switching without blocking in the node, based on the binary switching matrix for all switching elements have presented. The advantage of our model is the simplicity of matrix computations based on Boolean algebra methods, which is not strongly dependent on the number of elements in the matrix and able to scale switching node switching algorithm without cumbersome calculations. We propose the model of optical switch based on acousto-optic cell. Unlike previous implementations, it is able for two-dimensional signals switching, by using mutually orthogonal acousto-optical cells. Thus, the proposed structure of the switching node is fully connected, and allows to switching information signal with an arbitrary carrier frequency from any input channel to any output channel, with the possibility of wavelength conversion. Furthermore, we design an improved model of wavelength adjustment device. The novelty of the proposed device lies in using a single converter, instead of wavelength converters array. Our device based on the four-wave mixing effect and adaptable for any combination of input/output wavelengths by the reference signal generator Implementation of this device allows will improve the scalability of optical transport network structure.
Authors and Affiliations
Bohdan Strykhalyuk, Mykola Kaidan, Taras Maksymyuk, Volodymyr Pashkevych
Keywords
Related Articles
- EP ID EP460994
- DOI -
- Views 142
- Downloads 0
THE THEORETICAL ASPECTS AND PRACTICAL FEATURES MULTI-OBJECTIVE OPTIMIZATION OF PROCESSES TO ENSURE THE QUALITY OF REE AT THE MANUFACTURING STAGE
One of the most important scientific and technical problems is to ensure the quality and reliability of technical objects. In this paper the theoretical and practical aspects of modeling and optimization of quality assur...
THE MODEL OF INFORMATION PROTECTION MANAGEMENT IN TELECOMMUNICATION SYSTEMS
It is proposed and studied the model of conflict interaction of objects and subjects of cyberspace based on the principles of construction discretionary access control models in information and telecommunication systems....
DETERMINATION OF CURRENT SETTING TIME IN INDUCTIVE LOAD OF VOLTAGE-TO-CURRENT CONVERTER UNDER NON-HARMONIC INFLUENCE
The paper presents analysis of problems dealing with the determination of the current setting time in the inductive component of the complex load of Voltage-to-current (VTC) converter under non-harmonic input influence....
MICROSTRIP FILTER WITH SLOT RESONATORS IN GROUND PLANE
The development of contemporary SHF systems calls for a broad nomenclature of frequencyselective devices, band-pass filters in particular. One of the possible directions of filter design is the usage of electromagnetic-b...
INVESTIGATION OPTICAL FIBER BY DIGITAL HOLOGRAPHIC INTERFEROMETRY METHOD
The purpose of this paper is investigation the possibilities of applying methods of digital holographic interferometry to study the internal structure of the optical fiber, including the distribution of the refractive in...