Model of smoothing roughness on GaAs wafer surface by using nonabrasive chemical-and-mechanical polishing
Journal Title: Semiconductor Physics, Quantum Electronics and Optoelectronics - Year 2017, Vol 20, Issue 1
Abstract
Studied experimentally in this work has been the process of smoothing relief roughness on the GaAs wafer surface by using the method of contactless nonabrasive chemical-and-mechanical polishing under conditions of its rotational movement relatively to the polishing plate. The model of this process has been developed under assumption that the pure diffusion smoothing mechanism takes place there. It has been shown that satisfactory correspondence between respective calculated dependences and experimental results can be reached by introducing the “effective” diffusion coefficient providing account of etchant convection.
Authors and Affiliations
A. V. Fomin, G. A. Pashchenko, M. Yu. Kravetskyi, I. G. Lutsyshyn
Keywords
Related Articles
- EP ID EP179325
- DOI 10.15407/spqeo20.01.118
- Views 93
- Downloads 0
New evidence of the hopping nature of the excess tunnel current in heavily doped silicon p-n diodes at cryogenic temperatures
The new experimental data concerning the effect of magnetic field on electric properties of silicon diodes with high doping levels both in the emitter and base (conduction of which at low temperatures is determined by th...
Variational approach to the calculation of the lowest Wannier exciton state in wide type-II single semiconductor quantum wells
The possibility to change the spatial character of the Wannier exciton ground state in a wide single type-II semiconductor quantum well has been studied variationally. A heterostructure with the central layer forming a p...
Novel concepts of negative-n optics in master’s level educational courses
The novel ideas of negative refraction index (n) optics suitable for teaching special courses in universities at master’s level are systematized and analyzed. The most important innovative ideas in this field are recount...
Lowering the density of dislocations in heteroepitaxial III-nitride layers: Effect of sapphire substrate treatment (review)
In this paper, different methods for lowering the dislocation density such as incorporation of the buffer layers, substrate patterning and nitridation, silan-ammonia treatment are reviewed and compared. Advantages and li...
The non-linear dependence of 6СНВТ liquid crystal conductivity on the concentration of gold nanoparticles
Within the frequency range 10–1…106 Hz at the temperature 293 K, the effect of gold nanoparticles on the dielectric properties of the planar-oriented nematic liquid crystal 6СНВТ has been studied. The concentration of na...