MODELLING AND TESTING OF DYNAMIC PROPERTIES OF C0-45 TURBOCHARGERS

Abstract

The paper presents modelling process and results of the bench tests of the C0-45, which is a turbocharger for heavy-duty diesel engines. For turbochargers like this, it is necessary to measure the level of vibration. This paper presents the test results for 115 turbochargers. Rotor speed during the tests varied between 25,000 and 42,000 rpm. Rotor speed during the tests on a C0-45 turbocharger varied within three ranges, i.e., Range I: n=25,00032,000 rpm and a=0.5g; Range II: n=33,00038,000 rpm and a=1.0g; Range III: n=39,00042,000 rpm and a=1.5g; (g=9.81m/s2). Measurement of vibrations was realized by a sensor located on the body of the turbocharger. Bench tests also included measurement of key charge parameters such as the amount of mass trapped, mean flow velocities, turbulence level, gas pressure, temperature and oil flow. The results are presented in the form of diagrams showing the amplitude of the acceleration function with regard to the rotor’s RPM. Research shows that using the correct parameters in construction and technological processes of assembly are very important for the effective functioning turbochargers.

Authors and Affiliations

Grzegorz BUDZIK, Aleksander MAZURKOW

Keywords

Related Articles

CONTROL FUEL INJECTED GAS IN "MASTER-SLAVE" SYSTEM

Article was devoted to the automobile gas supply systems. Contains information about the structural factors that have an impact on improving the quality of work car gas system, and the development of automotive power sys...

PRAKTYCZNE PORADY DOTYCZĄCE NIEZAROBKOWEGO PRZEWOZU ZWIERZĄT DOMOWYCH NA TERENIE UNII EUROPEJSKIEJ – ASPEKT PRAWNY

W artykule zostało przedstawione praktyczne podejście do niezarobkowego przewozu zwierząt na terenie Unii Europejskiej. Starano się stworzyć swego rodzaju poradnik, który ułatwiłby podróże wraz ze zwierzętami. Artykuł ma...

POSSIBILITY OF PROCESSING PARAMETERS OBTAINED FROM ON-BOARD FLIGHT DATA RECORDERS FOR DIAGNOSTICS AND PREDICTING RELIABLE OPERATION PERIODS OF IMPORTANT AIRCRAFT EQUIPMENT

In recent years, much attention has been paid to the recording of flight data in order to provide objective information concerning routine and emergency in-flight situations. The data recorded can be used for assessing t...

POSSIBILITY OF THE HCR GEARING GEOMETRY OPTIMIZATION FROM PITTING DAMAGE POINT OF VIEW

The gearing contact strength which is manifested by pitting damage on its teeth flanks is one of the most important problems to need solve in the process of gearing design and calculation. According to nowadays valid sta...

METODA OZNACZANIA FORM WŁASNYCH KÓŁ ZĘBATYCH O ZŁOŻONYM KSZTAŁCIE

W pracy analizowane są drgania poprzeczne koła zębatego, rozważanego jako płyta pierścieniowa o złożonym kształcie. Omówiono procedurę oznaczania postaci drgań własnych koła, ulegających deformacji W pracy analizowane s...

Download PDF file
  • EP ID EP327084
  • DOI 10.20858/sjsutst.2017.97.2
  • Views 79
  • Downloads 0

How To Cite

Grzegorz BUDZIK, Aleksander MAZURKOW (2017). MODELLING AND TESTING OF DYNAMIC PROPERTIES OF C0-45 TURBOCHARGERS. Scientific Journals of Silesian University of Technology. Series Transport, 97(97), 17-25. https://europub.co.uk./articles/-A-327084