Modelling of Separation and Air Classification Processes of Aerodisperse Systems in the Shelving Device
Journal Title: Журнал інженерних наук - Year 2018, Vol 5, Issue 1
Abstract
The following paper considers the process of classification of polydisperse free-flowing material according to granulometric composition using a gravitational air classificator. There were considered the problems of the purity of separation of polydisperse bulk materials and methods for increasing the degree of separation of particles. There were presented and analyzed obtained the results of the comparison, the data of experimental research and computer simulation of two-phase hydrodynamics flow by CFD methods. The versatility of this complex allowed carrying out simulation of the process using various parameters. As a result, were obtained optimal operating parameters, which were experimentally verified. Based on the obtained data as a result of numerical modelling, the possibility of increasing gas flow influence to the polydispersed material were found, as well as organization along the walls of coarse fraction downward flow by dint of the optimizing the devise design (specifically through the organization of additional inlets for airflow) were obtained.
Authors and Affiliations
D. A. Varukha, V. A. Smirnov, M. Edl, M. M. Demianenko, M. P. Yukhymenko, O. O. Liaposhchenko
Keywords
Related Articles
- EP ID EP412457
- DOI 10.21272/jes.2018.5(1).f2
- Views 82
- Downloads 0
Increased Wear Coatings due Intrastructural Self-Correction
A mechanism for blocking and subsequent annihilation of endogenous microcracks due to their intrastructural self-correction has been proposed. It has been established that during tribomechanical processes of friction int...
Sulfur Utilization in the Systems of Biological Wastwater Denitrification
This paper focuses on the study of the possibility of using mineral carriers from sulfur (bio-sulfur/elementary sulfur) in anaerobic wastewater treatment systems under autotrophic denitrification conditions. The theoreti...
Adjusting the size of the rope thread in the machining of dimensional tool
The article considers the possibility of adjustment the geometrical deviations profile rope thread with a large pitch, which appear as a consequence of wear of the cutting tool during machining. Due to the fact that the...
Analysis of the Methodology of Constructing a Production Function Using Quality Criteria
In the article to forecast the trends of development of the state's industry (for example, Ukraine), a method for evaluating the parameters included in the classical Cobb-Douglas formula is developed. On the basis of the...
New approach in form cutter profiling
The universal algorithm, independent of geometric parameters of detail and required cutter type, becomes relevant within using modern computing means. Following this argument the universal mathematical model, which gener...