Monitoring And Controlling The Gas Plant By Wireless Sensor Network Using Co-operative Communication
Journal Title: International Journal of Advanced Research in Computer Engineering & Technology(IJARCET) - Year 2013, Vol 2, Issue 4
Abstract
This paper deals with zigbee based wireless sensor network platform for monitoring and controlling the gas plant using Co-operative communication .it consist of co-ordinator & sensor node .Co-ordinator is Centralized unit, it collects information from node on demand & provides to the end user. The sensor node is made intelligent for controlling the plant. This node attached with zigbee for remote controlling. We design a WSN using Co-operative Communication based on zigbee data acquisition system using ARM 7 processor which is having many important advantages such as low cost, low power consumption &low data rate. Furthermore, the system is simple stronger mobility& practicability. The system dedicates to automatic data collection & control. This paper describes the design of WSN based on zigbee technology using Master& Slave combination. It is mainly used for collecting & transferring the various monitoring information about temperature, LPG Gas, LDR light in gas plant. The system consists of zigbee based network, 3 sensors, PC master, two sub-masters & one slave combination. The co-operative communication technique is used to make sure that the slave is always in range of master .for this 2 sub-master units are used. here the main PC master terminal has VB software on it. The PC master terminal used to monitor the status of slave. The sensor node is implemented using ARM 7microcontroller programmed using Embeded ‘C’. The experimental results obtained demonstrates the usefulness of the proposed system in terms of low power consumption, low cost, targeted towards automation & remote control application.
Authors and Affiliations
Jyoti M. Giri
Keywords
Related Articles
- EP ID EP136080
- DOI -
- Views 116
- Downloads 0
Traffic Estimation in Mobile Ad Hoc Network Using Probe Packets
This paper presents a new method for estimating of traffic in mobile ad hoc by using probe packets. Probing based approaches involves sending test transactions over the network to monitor the path and performance o...
BF-PSO optimized PID Controller design using ISE, IAE, IATE and MSE error criteria
A PID controller is designed using ISE, IAE, ITAE and MSE error criteria for stable linear time invariant continuous system. A BF-PSO PID controller is designed for the plant to meet the desired performance specification...
DISTRIBUTED GENERATION- A NEW APPROACH
— Indian power sector and power distribution utilities are going through a reformation process to cope up with the regulatory change for reduction in AT & C Loss, improvement in Power Quality, Reliability of Po...
Design of Robotics Technology for Application in the Electrical field with narrow and hazardous space
Robotics is the branch of technology that deals with the design, construction, operation and application of robots [1] and computer systems for their control, sensory feedback, and information processing. These...
Additional Band width Design with Adaptive Orthogonal Frequency Division multiplexing
With the advent of new high data rate wireless applications, as well as growth of existing wireless services, demand for additional band width is rapidly increasing. A cognitive radio (CR) node is a radio device...