MONITORING OF THE TEMPERATURE REGIME AND THERMO-TECHNICAL PROPERTIES OF RAILWAY SUBGRADE MATERIALS
Journal Title: Scientific Journals of Silesian University of Technology. Series Transport - Year 2013, Vol 2013, Issue 80
Abstract
The modernisation of the Slovak Railways infrastructure has become a challenge to re-evaluate the dimensioning of the railway subgrade design for non-traffic loading, particularly in terms of the application of new materials into its construction and gradually changing climatic conditions. The first part of the paper shows the results of the long-term monitoring of the temperature regime of the railway subgrade on the railway track structure in the test stand (the position of the zero isotherm, the behaviour of the temperatures in the design layers and in their interfaces, the temperature of the air). The second part presents the results of the experimental determination of the thermo-technical properties of the built up materials into the railway subgrade of the trial stand structure (the thermal conductivity modulus, specific thermal capacity). The conclusion deals with the preliminary results derived from the comparison of the findings from both experimental measurements.
Authors and Affiliations
Libor IŽVOLT, Peter KUPČULIAK, Alžbeta PULTZNEROVÁ
Keywords
Related Articles
- EP ID EP87799
- DOI -
- Views 69
- Downloads 0
WYKORZYSTANIE ESTYMAT AMPLITUDOWYCH I DYSKRYMINANT BEZWYMIAROWYCH SYGNAŁU WA DO WYKRYWANIA ZUŻYCIA EKSPLOATACYJNEGO ŁOŻYSK TOCZNYCH
W niniejszym artykule przedstawiono analize wyników badan doswiadczalnych. Zorientowane były one na okreslenie zmian wartosci wybranych estymat amplitudowych i dyskryminant bezwymiarowych sygnałów wibroakustycznych (WA)...
OPERATIONAL RESTRICTIONS FOR REDUCING NOISE AND THE SAFETY OF AIR OPERATIONS
Many European airports are located in close proximity to residential or protected areas. Aircraft noise emissions caused by the landing and taking off of aircraft are a big problem in these areas. From an operational poi...
STRESS IN THE ECCENTRIC ELLIPTICAL GEARING TOOTH
In calculating the stress in the gear based on a number of assumptions and calculates the so. carrier current stress that is very useful if used in calculating the results and findings from research and practice in the d...
DIAGNOSTICS AND REGENERATION OF COMMON RAIL INJECTORS
The article presents the methodology of Common Rail injector diagnostic, regeneration and regulation with use of professional test stands. The EPS 815 machine can be used to test and repair all BOSCH injectors fully sati...
FORMULATION OF MATHEMATICAL AND PHYSICAL MODEL OF PNEUMATIC FLEXIBLE SHAFT COUPLINGS
On our department we deal with the research and development of pneumatic flexible shaft couplings. The aim of this paper is to present the way to determine the static load characteristics of pneumatic coupling. By this m...