Multiple Roughness Characteristics of Chemically Deposited Ni-P-W Coatings
Journal Title: Tribology in Industry - Year 2012, Vol 34, Issue 4
Abstract
This paper presents an experimental study of multiple roughness characteristics of Ni-P-W coatings on a mild steel substrate. The different roughness parameters considered are centre line average roughness (Ra), root mean square roughness (Rq), skewness (Rsk), kurtosis (Rku) and mean line peak spacing (Rsm). The aim of the present study is to optimize the coating process parameters based on Taguchi method and Grey relational analysis in order to obtain the particular bath composition which may be used to deposit Ni-P-W coatings with optimum roughness characteristics. Experiments are carried out based on the L[sub]27[/sub] Taguchi orthogonal design using the combination of three process parameters, namely, concentration of tungsten ion, concentration of reducing agent and concentration of nickel source. It is observed that concentration of tungsten ion has the most significant influence in controlling roughness characteristics of Ni-P-W coating. The surface morphology, composition and phase structure of coatings are also studied with the help of scanning electron microscopy, energy dispersive X-ray analysis and X-ray diffraction analysis respectively.
Authors and Affiliations
S. Roy, P. Sahoo
Keywords
Related Articles
- EP ID EP135572
- DOI -
- Views 87
- Downloads 0
Experimental Investigation of Friction Coefficient and Wear Rate of Composite Materials Sliding Against Smooth and Rough Mild Steel Counterfaces
In the present study, friction coefficient and wear rate of gear fiber reinforced plastic (gear fiber) and glass fiber reinforced plastic (glass fiber) sliding against mild steel are investigated experimentally. In order...
Methods of Assessing the Resource of the Crankshaft Bearing of Internal Combustion Engine Based on the Calculation of Hydro-Mechanical Characteristics
The purpose of the article is to develop a tool to assess the theoretical resource crankshaft bearings of internal combustion engine. As a result, two methods for evaluating of the theoretical resource crankshaft bearing...
Development of Mobile Device for Oil Analysis
This paper presents the results of project focused on development and practical application of mobile instrument for on-site analysis of industrial oils. For years, the implementation of the oil analysis was limited to a...
Theory Reviews - Hardware and Software Support for Testing Material on Specimens of the Small Cross Section
Testing techniques to obtain the mechanical properties of materials on specimens of the small cross section (miniature specimen) become the subject of numerous researches due to several advantages, in economic and organi...
Tribological and Electrochemical Properties of AISI D3 Steel Coated with Hafnium Carbon Nitride
In this research work, hafnium carbonitride (HfCN) coatings were developed via physical vapor deposition with the aim to determine the electrochemical behavior of the HfCN layers on industrial steel substrates. The HfCN...