Natural Frequencies of Small Cylinders and Tubes
Journal Title: Problemy Mechatroniki. Uzbrojenie, lotnictwo, inżynieria bezpieczeństwa - Year 2015, Vol 6, Issue 2
Abstract
The paper deals with modal analysis of the cylinders and tubes and their mutual comparison. Nowadays, modal analysis is a powerful method of describing the vibration properties. When we know own shapes and natural frequencies, we can predict e.g. behaviour of tubes under loading conditions. The tubes dimensions were taken as dimensions which are close to assault rifle barrels. The same dimensions were taken for cylinders. The cylinders and tubes as 3D objects were modelled and their lengths and thicknesses were modified. Modal analysis was performed by LS-DYNA software using FEM with iterative Lanczos method. In Tables 1-12, the natural frequencies for these cantilever beams and their corresponding own shapes with modification in fixing length for three different thicknesses are listed. In Figure 2 and 7-9, these natural frequencies versus modification in fixing length for three different thicknesses for corresponding modes are shown. In Figure 3-5 and 10-12, natural frequencies versus length of cylinders and tubes for three different thicknesses for corresponding modes are shown.
Authors and Affiliations
Peter LISY
Keywords
Related Articles
- EP ID EP63052
- DOI 10.5604/20815891.1157770
- Views 97
- Downloads 0
Correction Procedure of Wave Signals for a Viscoelastic Split Hopkinson Pressure Bar
A polymeric split Hopkinson pressure bar technique (SHPB) is preferred for testing materials with low mechanical impedance. However, the use of polymeric bars requires additional analysis for data reduction, temperature...
Analysis of the Levitation Forces Generated by High-Temperature Superconductors Located within the Magnetic Field of a UAV Catapult System
This paper presents an analysis of the levitation forces applied to the launch truck of an innovative UAV (unmanned aerial vehicle) catapult system with high-temperature superconductors. The levitation force is a result...
Numerical-Experimental Evaluation of the Armour Protection Capabilities
This paper presents a numerical and experimental study of a composite add-on armour panel used for protection of lightweight armoured vehicles impacted by the 7.62 mm API (Armour Piercing Incendiary) BZ projectile (2nd l...
The Idea of Automated Anti-aircraft Defense System of Distributed Battery or Squadron Equipped with 35 mm Canons
In this article the idea of automated anti-aircraft defense system was presented. The system consists of distributed battery or squadron of 35 mm canons and is realizing as development project in 2009-2011 years. The pro...
Analiza stabilności sterowanej girokamery umieszczonej na pokładzie obiektu latającego
W pracy przedstawiono model matematyczny dynamiki kamery umieszczonej na pokładzie obiektu latającego sterowanej i stabilizowanej giroskopowo. Zadaniem kamery jest obserwacja terenu, identyfikacja i śledzenie wykrytych c...