A multiaxial incremental fatigue damage formulation using nested damage surfaces
Journal Title: Frattura ed Integrità Strutturale - Year 2016, Vol 10, Issue 37
Abstract
Multiaxial fatigue damage calculations under non-proportional variable amplitude loadings still remains a quite challenging task in practical applications, in part because most fatigue models require cycle identification and counting to single out individual load events before quantifying the damage induced by them. Moreover, to account for the non-proportionality of the load path of each event, semi-empirical methods are required to calculate path-equivalent ranges, e.g. using a convex enclosure or the MOI (Moment Of Inertia) method. In this work, a novel Incremental Fatigue Damage methodology is introduced to continuously account for the accumulation of multiaxial fatigue damage under service loads, without requiring rainflow counters or path-equivalent range estimators. The proposed approach is not based on questionable Continuum Damage Mechanics concepts or on the integration of elastoplastic work. Instead, fatigue damage itself is continuously integrated, based on damage parameters adopted by traditional fatigue models well tested in engineering practice. A framework of nested damage surfaces is introduced, allowing the calculation of fatigue damage even for general 6D multiaxial load histories. The proposed approach is validated by non-proportional tensiontorsion experiments on tubular 316L stainless steel specimens.
Authors and Affiliations
Marco Meggiolaro, Jaime de Castro, Hao Wu
Keywords
Related Articles
- EP ID EP149219
- DOI 10.3221/IGF-ESIS.37.19
- Views 65
- Downloads 0
Fretting in complete contacts - the use of Williams’ solution
Williams’ solution may be used to characterize the corners of ‘complete’ fretting contacts. Here we look at the practicalities of conducting fretting tests using a range of different kinds of apparatus and the kin...
Atomistic modeling of different loading paths in single crystal copper and aluminum
Utilizing molecular dynamics (MD) integration model we have investigated some of the relevant physical processes caused by different loading paths at the atomic level in Cu and Al monocrystal specimen. Interaction...
Measurement and simulation of strain fields around crack tips under mixed-mode fatigue loading
For various configurations examined in a series of fatigue experiments on thin-walled tubes under tension and torsion, the experimental results – crack path, crack growth life, near crack tip deformations, and cr...
Numerical modelling in non linear fracture mechanics
Some numerical studies of crack propagation are based on using constitutive models that account for damage evolution in the material. When a critical damage value has been reached in a material point, it is natural...
Failure prediction of T-peel adhesive joints by different cohesive laws and modelling approaches
In this work, Cohesive Zone Modelling (CZM) was used to simulate failure of T-peel bonded joints with 1.5mm thick adherends, respectively, bonded toghether with Loctite Multibond 330 adhesive. The fracture toughness and...