Arm 7 Based Robotic Arm Control By Electronic Gesture Recognition Unit Using Mems
Journal Title: INTERNATIONAL JOURNAL OF ENGINEERING TRENDS AND TECHNOLOGY - Year 2013, Vol 4, Issue 4
Abstract
Mechatronics is one of the present trends in the era of computing in today’s system automation industry and control. The proposed project is one such attempt of implementing an accelerometer based system to communicate with an industrial robotic arm wirelessly. This project comprises of controlling of robotic arm powered with ARM7 based LPC1768 core. The LC1768 core has to be interfaced with DC motors of robotic arm to control the movements of robotic arm. MEMS is a three dimensional accelerometer sensor used for this purpose, this accelerometer sensor captures gestures of human-arm and produces three analog output voltages in three dimensional axes. And two flex sensors are used to control the gripper movement. For various movements of accelerometer and flex sensors corresponding characters will be sent to the ARM7 core wirelessly using 2.4GHz RF module. And depending on the received character robotic arm can be controlled in Dynamic or Static mode by communicating with EEPROM using I2C protocol.
Authors and Affiliations
K. Brahmani#1 , K. S. Roy#2 , Mahaboob Ali
Keywords
Related Articles
- EP ID EP93297
- DOI -
- Views 106
- Downloads 0
Performance Analysis with Lifetime Optimization of LEACH Routing Protocol for Wireless Sensor Network
Advancement in technology like MEMS (micro electromechanical systems), wireless communication and digital electronics led the development of wireless sensor network. The distributed nature and dynamic topology of WSN (wi...
Pervious Concrete: New Era For Rural Road Pavement
Pervious concrete is a relatively new concept for rural road pavement, with increase into the problems in rural areas related to the low ground water level, agricultural problem. Pervious concrete has introduced in...
Motion Estimation Algorithms for Baseline Profile of H.264 Video Codec
The H.264 video compression standard is the most efficient video compression techniques available today. H.264 encoder can reduce the size of a digital video file by more than 80% compared with the Motion JPEG form...
Low Power Full Adder With Reduced Transistor Count
Basic building blocks of most of the arithmetic and logic circuits are formed by XOR logic gate. This paper proposes a new 3T-XOR gate with significant area and power savings. In most of the digital systems adder...
A Review Paper on RF MEMS Switch for Wireless Communication
This paper deals with the RF (Radio Frequency)-MEMS (Micro-Electro-Mechanical-System) switch importance in the wireless communication system. Also explains the dominance of RF-Switch over existing devices like PIN...