Bioleaching of Mining Waste of Hindustan Zinc Limited, Udaipur
Journal Title: International Journal of Engineering Sciences & Research Technology - Year 2014, Vol 3, Issue 12
Abstract
The research work presented in this paper is on a Biotechnological investigation for the recovery of zinc from mining waste i.e. Low grade ore Leaching Studies were carried out at different pH using mixed culture grown from mine water. Recovery of zinc in control set (without culture) was 8% in 37 days and at the same pH (1.6) with the culture of leaching bacteria, the recovery of zinc was 89%, whereas at pH 1.8 and 2.0 zinc recovery was 47% and 46% respectively. The best leaching of low grade ore was obtained at pH 1.6. From the results obtained during experimentation it is found that the recovery of zinc is not dependent only on the iron content in the solution because with the same content of iron there is a difference of recovery of zinc. It shows that both types of reaction mechanisms, direct & indirect are involved during leaching process.Keywords: Die materials, die wear, contact pressure, sliding distance, die wear test.
Authors and Affiliations
Keywords
Related Articles
- EP ID EP137380
- DOI -
- Views 75
- Downloads 0
3D Printing Making the Digital Real
3D printing is quickly expanding field, with the popularity and uses for 3D printers growing every day. 3D printing can be used to prototype, create replacement parts, and is even versatile enough to print prosthe...
Static Structural Analysis of Rotary Weeding Blades using CAD Software
Rotary weeding blade is one of the important component for a tractor operated rotary weeder and need to be designed in such a way that they have enough strength in order to avoid the unbalancing force on the rotar...
IMPLEMENTATION OF MANET CONTROL PACKET DROP USING BAIT DETECTION APPROACH
The conception following this development is the communication between nodes with the purpose of nodes cooperating with a piece of other. The expansion of mean nodes can direct to severe security concern; such nod...
THE NEW THEORY OF THE ONENESS OF SQUARE AND CIRCLE
Originally, Pi constant was understood as the ratio of circumference of a circle to its diameter. As the length of the circumference could not be measured due to its curvature, Exhaustion method was adopted for ma...
Effect of Heat Source/Sink and Mixed Convection Flow of Maxwell Fluid on Heat Transfer near A Stagnation Point with Convective Condition
The effects of thermal radiation and heat transfer of a Maxwell fluid near a mixed convection stagnation point flow over a moving surface in the presence of heat source/sink has been studied. The governing differe...