Comparing PI controller Performance for Non Linear Process Model
Journal Title: INTERNATIONAL JOURNAL OF ENGINEERING TRENDS AND TECHNOLOGY - Year 2013, Vol 4, Issue 3
Abstract
This paper demonstrates the efficient method of tuning PI controller parameters by comparing different tuning rules. The method implies an analytical calculation of the controller gainܭ,Integral time ߬for a PI controlled system which is modeled to be a First Order Plus Dead Time (FOPDT) process. A bench mark non linear system, conical tank is considered for study for which the identified transfer function model to be a FOPTD model. A MATLAB program with an objective is written to find out the optimum value for the PI controller parameter which can achievethe system requirements to minimize the overshoot, to maintain a fast system response, removal of dead time and to maintain robustness. The performance of the controller for different tuning rules has been investigated in a MATLAB simulation environment. Out of these different controllers tuning methods Suyama, Tsang and Rad outperforms well with no overshoot. For setting time Astrom and Hagglund gives better result. This tuning method gives the better results based on performance indices also.
Authors and Affiliations
Abhishek Sharma1 and Nithya Venkatesan2
Keywords
Related Articles
- EP ID EP125488
- DOI -
- Views 109
- Downloads 0
[u][/u] Simulation and Analysis of Passive and Active Suspension System Using Quarter Car Model for Different Road Profile
The objectives of this study are to obtain a mathematical model for the passive and active suspensions systems for quarter car model. Current automobile suspension systems using passive components only by utilizi...
Node Placement for Efficient Coverage in Homogeneous Wireless Sensor Networks
Coverage problems are caused due to the limited communication and sensing range between sensor nodes. The coverage problem casts a result of, how well an area is monitored or tracked by sensors. A good sensor deplo...
Synthesis of Proton Exchange Membranes from Acrylic Ester and Styrene Resin
In this work, an styrene-acrylic ester copolymer resin was used to synthesize proton exchange membranes for its application in fuel cells. The properties of these membranes were modified by the sulfonation reaction at di...
Deposition, Optical Characterization and Durability Tests of MgF2 Antireflection Thin Films
In this study, structural and optical properties of MgF2 thin films produced by physical vapour deposition technique on the BK7 glass substrate have been investigated. Deposited films were annealed at different tem...
Caching in Wireless Sensor Networks: A Survey
Wireless Sensor Networks are exploited in multiple applications. There are some issues like important data loss, many times during transmission and reception process by the small tiny sensor nodes presents in the WSNs. F...