Comparison of Different Absorbing Boundary Conditions for GPR Simulation by the Time Domain Finite Element Method
Journal Title: International Journal of Modern Engineering Research (IJMER) - Year 2014, Vol 4, Issue 3
Abstract
This paper compares three boundary conditions, i.e. transmitting boundary condition, Sarma absorbing boundary condition and the uniaxial complete matched layerabsorbing boundary condition for simulation of ground penetrating radar (GPR) by the time domain finite element (FEM) method. The formulations of the three boundary conditions for the FEM method are described. Their effectiveness in absorbing the incident electromagnetic waves are evaluated by the reflection coefficient on the boundary of a simple GPR model.The results demonstrate that UPML boundary condition can yield a reflection coefficient smaller than -50 dB, which is -20 dB smaller than other two boundary conditions.
Authors and Affiliations
ZhiyongZhang1,2 , Man Li
Keywords
Related Articles
- EP ID EP147158
- DOI -
- Views 95
- Downloads 0
Biogas as a Alternate Source Of Energy And Creating Awareness Among Rural People
[b][/b]This paper deals with the use of biogas as a alternate source of energy and creating awareness among rural people. Biogas refer to a gas made from anaerobic digestion of agricultural and animal waste. The gas is u...
Implementing Re-Active Power Compensation Technique in Long Transmission System (750 Km) By Using Shunt Facts Control Device with Mat Lab Simlink Tool
ABSTRACT: This paper attempts to implementation and simulation of the Fuzzy logic control of firing angle for SVC in order to achieve better, smooth and adaptive control of reactive power by using facts technology,...
Design & Optimization of Equipment for Insertion of Tube Bundle of Heat Exchanger
Presently pressure vessel industries, manufacturing screw plug heat exchanger implements manual way for inserting tube bundle against shell. This manual way of inserting tube bundle inside shell involves challenges...
Recognition of Dry and Blurred Fingerprint Using Local Entropy Thresholding Method
Dry fingerprint has blurred image, because of overlapping of valleys, singular point to the fingertip and ridges. By using local entropy thresholding method, we extract the fingerprint images. This method is com...
Theoretical heat conduction model development of a Cold storage using Taguchi Methodology
In this project work a mathematical heat conduction model of a cold storage (with the help of computer program; and multiple regression analysis) has been proposed which can be used for further development of c...