Energy and Exergy Analysis of Extraction cum Back Pressure Steam Turbine
Journal Title: International Journal of Modern Engineering Research (IJMER) - Year 2013, Vol 3, Issue 2
Abstract
Abstract: Power is very vital factor for development of any society. Coal shares major chunk of fuels used to produce power in thermal power plants in India. Coal reserves are limited and present coal consumption rate is in increasing trend to fulfill the power demand. Therefore energy efficiency and energy conservation are of prime importance. Moreover, fossil fuel based power plant has significant negative environmental impacts. Energy and exergy analysis are used to analyze the performance of thermal systems. Energy analysis deals with quantity aspect whereas exergy analysis deals with quality aspect in addition to quantity. Exergy analysis focuses on magnitude and true location of energy loss. In this analysis, energy efficiency, exergy destruction, exergy efficiency and turbine heat rate are evaluated at 70 % and 85 % maximum continuous rating (MCR) of steam turbine. Analysis shows that operating turbine at 85 % MCR attract heat rate improvement by 17.01 kJ / kWh, which reduces CO2 emission by 26.89 kg/h, SO2 emission by 26.89 kg/h and ash generation by 41.47 kg/ day.
Authors and Affiliations
A. H. Ran
Keywords
Related Articles
- EP ID EP151350
- DOI -
- Views 114
- Downloads 0
Enhance Example-Based Super Resolution to Achieve Fine Magnification of Low Resolution Images Using Neighbour Embedding Method
Images with high resolution (HR) often required in most electronic imaging applications. There are two types of resolution first is high resolution and other one is low resolution. Now high resolution means pi...
Wear In Hydrodynamic Journal Bearings: A Review
The importance of friction and wear control cannot be overemphasized for economic reasons and long-term reliability. This paper presents the reviews of different works in the area of wear and friction in hydrodynam...
Detection of DC Voltage Fault in SRM Drives Using K-Means Clustering and Classification with SVM
This paper presents a new method of detection of DC voltage fault in SRM drives based on K Means Clustering technique. Also the range of fault is classified using Support Vector Machines (SVM). Switched reluctance motors...
Review on Implementation of Fir Adaptive Filter Using Distributed Arithmatic and Block Lms Algorithm
Adaptive filters play very important role in signal processing application. There are several algorithms for implementation of filters such as Least mean square (LMS), Recursive least square (RLS), etc. The LMS...
Comparative Study, Design and Performance Analysis of Wide Slot Antenna with Patch-Feed for Bandwidth Enhancement
Abstract: This paper presents a design of triangular wide slot antenna with same shaped patch which is fed by CPW. Patch is working as a radiating element and wide slot working as a ground. Detail simulation is con...