Fatigue modelling for gas nitriding
Journal Title: Frattura ed Integrità Strutturale - Year 2016, Vol 10, Issue 38
Abstract
The present study aims to develop an algorithm able to predict the fatigue lifetime of nitrided steels. Linear multi-axial fatigue criteria are used to take into account the gradients of mechanical properties provided by the nitriding process. Simulations on rotating bending fatigue specimens are made in order to test the nitrided surfaces. The fatigue model is applied to the cyclic loading of a gear from a simulation using the finite element software Ansys. Results show the positive contributions of nitriding on the fatigue strength
Authors and Affiliations
H. Weil, S. Jégou, L. Barrallier , A. Courleux, G. Beck
Keywords
Related Articles
- EP ID EP138962
- DOI 10.3221/IGF-ESIS.38.08
- Views 63
- Downloads 0
A study of white etching crack formation by compression-torsion experiments
In this study, an attempt was made to recreate the bearing damage phenomenon “White Etching Cracks” with a simplified testing setup. Rolling contact fatigue conditions were simulated with in-phase and out-ofphase...
Estimation of stepwise crack propagation in ceramic laminates with strong interfaces
During the last years many researchers put so much effort to design layered structures combining different materials in order to improve low fracture toughness and mechanical reliability of the ceramics. It has&nb...
A new formulation for estimating maximum stress intensity factor atthe mid plane of a SENB specimen: Study based on 3D FEA
In this investigation, three-dimensional elastic finite element analyses have been conducted tocompute the stress intensity factor (KI) in a SENB specimen with varied thickness (B) and crack-length to widthratio (a...
Effects of surfaces nanocrystallization induced by shot peening on material properties : a Review
A brief description of surface nanosrystallization process via severe plastic deformation is presented. To come to the point different shot peening methods which have proved to be able to create nanocrystalline layers ar...
Crack growth threshold under hold time conditions in DA Inconel 718 – A transition in the crack growth mechanism
Aeroengine manufacturers have to demonstrate that critical components such as turbine disks, made of DA Inconel 718, meet the certification requirements in term of fatigue crack growth. In order to be more re...