Feasibility of Underwater Friction Stir Welding and Its Optimization Using Taguchi Method
Journal Title: International Journal of Engineering Sciences & Research Technology - Year 30, Vol 3, Issue 7
Abstract
In this paper we are approaching to the feasibility of underwater friction stir welding of aluminum alloy which widely has the various applications where strength to density ratio plays a crucial role such as in marine, aircraft and automobile industries. The problems associated with joining of parts through conventional welding method is overcome by use of friction stir welding process yet the friction stir welding encloses the problems such as rapid tool wear especially during plunging period of tool, softening of the weld nugget formed due to decreased rate of cooling hence formation of precipitates takes more time which causes the mechanical properties such as strength, hardness etc are reduced and dissimilar base materials with considerable difference in their melting points are still a challenge to be welded by the present process . To overcome the above difficulties of the modified form of process of friction stir welding is used hence the whole process is performed under water i.e Underwater friction stir welding is used now a days.
Authors and Affiliations
Prof. Mohd Abbas1
Keywords
Related Articles
- EP ID EP163794
- DOI -
- Views 81
- Downloads 0
Design and Simulation of a High Performance Multiplier using Reversible Gates
Multipliers are the significant part of the present technology as they are mostly used in the convolution, fast Fourier transform, CPU designing etc. The speed and power dissipation of the multiplier operation is...
Malicious Codes in Mobile Phones
In this paper a survey study is made on various issues of mobile malicious codes. Spreading pattern of different mobile viruses is discussed to make a collective analysis of concerned problem and various approache...
Content Based Copy Detection Using TIRI-DCT Method
Water marking relies on inserting information into the video stream in order to detect copies. This paper presents an approach to watermarking called content base copy detection(CBCD) which uses a combination of...
A FILTER FOR ANALYSIS AND DETECTION OF MALICIOUS WEB PAGES
Internet services are more necessary part of our daily life. We rely growingly on the ease and flexibility of Internet connected devices to shop, communicate and in general perform tasks that would require our physical...
Low Pass Filter Design Using Bacterial Foragaing and Particle Swarm Optimization
[i][/i] Social foraging behavior of Escherichia Coli bacteria has been analyzed to develop an algorithm to solve optimization problem in Electronics and Control Industry. The chemotactic movement of a virtual bacte...