Integrity and life estimation of turbine runner cover in a hydro power plant
Journal Title: Frattura ed Integrità Strutturale - Year 2016, Vol 10, Issue 36
Abstract
This paper presents integrity and life estimation of turbine runner cover in a vertical pipe turbines, Kaplan 200 MW nominal output power, produced in Russia, and built in six hydro-generation units of hydroelectric power plant „Đerdap 1” in Serbia. Fatigue and corrosion-fatigue interaction have been taken into account using experimentally obtained material properties, as well as analytical and numerical calculations of stress state, to estimate appropriate safety factors. Fatigue crack growth rate, da/dN, was also calculated, indicated that internal defects of circular or elliptical shape, found out by ultrasonic testing, do not affect reliable operation of runner cover.
Authors and Affiliations
A. Sedmak, S. Bosnjak, M. Arsic, Z. Savic
Keywords
Related Articles
- EP ID EP117782
- DOI 10.3221/IGF-ESIS.36.07
- Views 49
- Downloads 0
Role of plasticity-induced crack closure in fatigue crack growth
The premature contact of crack surfaces attributable to the near-tip plastic deformations under cyclic loading, which is commonly referred to as plasticity induced crack closure (PICC), has long been focused as sup...
State update algorithm for associativeelastic-plastic pressure-insensitive materialsby incremental energy minimization
This work presents a new state update algorithm for small-strain associative elastic-plasticconstitutive models, treating in a unified manner a wide class of deviatoric yield functions with linear ornonlinear strai...
Crack growth behavior of aluminum alloy 6061 T651 under uniaxial and biaxial planar testing condition
The crack growth behavior of the aluminum alloy 6061 T651 was investigated using cruciform specimens with a measurement area of 120 x 120 x 2 mm3 with two center crack configurations of the starting notch par...
A link between the peak stresses and the averaged strain energy density for cracks under mixed-mode (I+II) loading
In this work, a link between the averaged strain energy density (SED) approach and the peak stress method in the case of cracks subjected to mixed mode (I+II) loading has been investigated. Some closed-form e...
Fracture mechanics of pseudoelastic NiTi alloys: review of the research activities carried out at University of Calabria
This paper reports a brief review of the research activities on fracture mechanics of nickel-titanium based shape memory alloys carried out at University of Calabria. In fact, this class of metallic alloys show a u...