Pose Estimation in Automated Visual Inspection System using PSO
Journal Title: International Journal of Engineering Sciences & Research Technology - Year 30, Vol 3, Issue 11
Abstract
In this paper, we propose a Particle Swarm Optimization (PSO) based approach to determine the pose of a rigid body in Automated Visual Inspection having three degree of freedom. We have experienced the effect of noise at 20 dB SNR and 40 dB SNR and also observe mismatch getting from incorrect correspondence between object space points and image space points, on the estimation of three parameters. The maximum error in translation parameters (about x-axis and y-axis) is less than 0.1 cm and rotational error is less than 0.08 degree at 40 dB SNR and 0.45 cm and 0.6 degree at 20 dB SNR respectively. The error in parameter estimation is insignificant up to 5 pairs of mismatched points out of 16 points and results skyrockets when the mismatch occurs in more than 5 pair of points. These results have proved the robustness of PSO in determining the pose of object in automated visual inspection.
Authors and Affiliations
A. Mukhopadhyay
Hardware Implementation of Automated Pantry Order System using ZIGBEE
This paper gives the brief introduction to the Automated Pantry Order System using ZIGBEE. This Paper is mainly focusing on hardware implementation of the proposed system. Various requirements to design the hardwa...
A Survey of Multi Through Maintenance Technology Tools for Dairy Industry: Case
This research investigates some industrial maintenance and respective maintenance at a dairy product processing plant. Both qualitative and quantitative techniques for analyzing maintenance systems problems are pursued...
SECURITY ISSUES IN CLOUD COMPUTING AND THEIR COUNTERMEASURES
Cloud computing technology is a new concept of providing dramatically scalable and virtualized resources, bandwidth, software and hardware on demand to consumers. Consumers can typically requests cloud services vi...
REINFORCEMENT DETAILING FOR OPENING CORNERS
In the present study c onventional a rrangements of detailing of rebars in the opening corners have been shown to be structura lly inadequate and an improved but simple detailing of opening cor...
COMPARATIVE STUDY AND NEW APPROACH MULTI CLASSIFIERS: APPLICATION TO THE RECOGNITION OF ARABIC NUMERALS
Generally, most of the problems of recognition are due to the classification of the feature vectors, or to the mismatch between learning conditions and test, so to improve the robustness of the existing recognitio...