Sensor Network for Monitoring Physiological Signals of Multiple Patients Using can Bus
Journal Title: International Journal of Engineering Sciences & Research Technology - Year 30, Vol 3, Issue 3
Abstract
The project makes use of CAN technology to sense and transfer the physiological signals and parameters of a patient’s body. With the help of the project, efficient medical services can be provided to the patient in appropriate time. A microcontroller board is used for analysing the signals from patient’s body. If any abnormal value is sensed, the monitoring system gives intimation by raising alarm on the receiver side which are generally in doctor’s cabin or monitoring room. All the process parameters will be seen at the hyper terminal window on the computer on receiver’s side. This project is designed to monitor pulse rate and body temperature of a patient’s body and has been designed considering two patients. It can be achieved using CAN technology. At present this kind of high speed and continuous patient monitoring system has not been implemented Currently, the continuous manual monitoring is done which consumes lot of time and also increases the skilled manpower. This project shall cover the flaws of speed and interfacing problems of the existing system. This increases the efficiency of hospital staffs and improves the comfort of patients and makes monitoring easier. Another most important point is that system makes sure the parameters of different patients do not get mixed up and are sent by the right name of the patient and recorded accordingly as well, only if needed. For providing high transmission speeds, this project has been designed as a system that uses CAN protocol which has a high data rate of 1 Megabyte per second at 1 Megahertz frequency.
Authors and Affiliations
Ms. Prerana Thool*1
Keywords
Related Articles
- EP ID EP106297
- DOI -
- Views 53
- Downloads 0
ELECTRICAL CHARACTERISTICS OF THE BLENDS OF SILICON AND EPDM OUTDOOR INSULATORS
Polymeric insulators are widely used as outdoor H.V insulators due to their superior service properties in the presence of heavy polluted and wet condition, resistance to vandalism and high dielectric strength vol...
EFFECT OF SURFACTANT (N-BUTANOL) BEHAVIORS ON SUBCOOLED NUCLEATE POOL BOILING OVER MICROWIRE
The flow and heat transfer characteristics of nanofluid were attracting many researchers during the last two decades. Convection heat transfer in it is especially important for its potential applications. In this i...
Effects of visual conflicts on 3D Object Picking Process In Non Immersive Virtual Environment
Object Picking in Virtual Environments is one of the main tasks along with travel and manipulation. It deals with indicating objects and has been implemented with multiple techniques, each trying to improve perfor...
ANALYSIS OF TRACE METAL CONTENT IN CHILLIE POWDER AVAILABLE IN THE SRI LANKAN MARKET
Chilie ( Capsicum annuum L.) powder is the dried, pulverized fruit of chilies and used as a spice to add pungency flavour to the dish. This study was conducted to investigate the trace metal content in c...
An Investigation on Generation of Electricity Using Foot Step
Nowadays energy and power are the one of the basic necessities regarding this modern world. As the demand of energy is increasing day by day, so the ultimate solution to deal with these sorts of problems is just t...