Studies on Large Span Cantilever Structures by using Staad PRO. Analysis
Journal Title: International Journal of Engineering Sciences & Research Technology - Year 30, Vol 3, Issue 10
Abstract
The main aim of this investigation is to study which section of the large span cantilever structures are more safe and economical among the three sections of pipe, angle and tube. This study focused on the deflections of cantilever spans under different loading conditions such as dead load, live load and wind load and their design details for different spans starting from 8 m span to 20 m span by increasing in the order of 4 m span. During the study the steel take off also varies with the variation in different materials and variation in different spans and observed that the deflections also vary with the variation of spans and elements with two side cantilever structures. On the study the inference is that by comparing the output of STAAD.Pro (structural analysis and design) analysis results of different sections and it is concluded that the steel take off for pipe section is 3% less than tube section in weight and 14% less than angle section in weight. This gives savings 9% in total weight of steel required for frame and concluded that pipe section is more economical when compared to other two sections.
Authors and Affiliations
Abhilash Pokkilan
Keywords
Related Articles
- EP ID EP127532
- DOI -
- Views 57
- Downloads 0
PRODUCTION OF BIODIESEL FROM Calophyllum Inophyllum L. OIL BY LIPASE ENZYME AS BIOCATALYST
Production of biodiesel from Calophyllum inophyllum L oil through transesterification by enzyme as catalyst and methanol as solvent has been done. Determinations of molecular weight of lipase enzyme used SDS - P...
DESIGN AND FABRICATION OF FATIGUE ANALYSIS TEST SETUP FOR COMPOSITE MATERIAL TESTING
Lot of research work is published on various aspects of fatigue failure behavior of laminated composite materials. There is no standard method followed by researchers since these research works published in this a...
Face Recognition based on Histogram of Oriented Gradients, Local Binary Pattern and SVM/HMM Classifiers
Face recognition is one of the challenging biometric technologies which has widespread applications in many fields such as access to security systems, identification of a person in law enforcement, identifying the...
OPTIMIZATION AND ANALYSIS OF SLANT BED - A REVIEW
For the Mechanical Design Engineering we have face many complex problem of structural design, the solution of that type of problems are not possible with analytical methods. In such case we have to use the Numeric...
To Estimate the Cooling Load of a Desire Space with help of C Programming
Cooling load of a desire space is the rate of heat which must be removed from the space to maintain at a specific space air temperature and moisture content. This work provides a procedure for preparing calculatio...