The influence of fibre orientation on the post-cracking tensile behaviour of steel fibre reinforced self-compacting concrete
Journal Title: Frattura ed Integrità Strutturale - Year 2015, Vol 9, Issue 31
Abstract
Adding fibres to concrete provides several advantages, especially in terms of controlling the crack opening width and propagation after the cracking onset. However, distribution and orientation of the fibres toward the active crack plane are significantly important in order to maximize its benefits. Therefore, in this study, the effect of the fibre distribution and orientation on the post-cracking tensile behaviour of the steel fibre reinforced self-compacting concrete (SFRSCC) specimens is investigated. For this purpose, several cores were extracted from distinct locations of a panel and were subjected to indirect (splitting) and direct tensile tests. The local stress-crack opening relationship (σ-w) was obtained by modelling the splitting tensile test under the finite element framework and by performing an Inverse Analysis (IA) procedure. Afterwards the σ-w law obtained from IA is then compared with the one ascertained directly from the uniaxial tensile tests. Finally, the fibre distribution/orientation parameters were determined adopting an image analysis technique.
Authors and Affiliations
A. Abrishambaf,, V. M. C. F. Cunha, J. A. O. Barros
Keywords
Related Articles
- EP ID EP94696
- DOI 10.3221/IGF-ESIS.31.04
- Views 106
- Downloads 0
Combined lock-in thermography and heat flow measurements for analysing heat dissipation during fatigue crack propagation
During fatigue crack propagation experiments with constant force as well as constant stress intensity lock in thermography and heat flow measurements with a new developed peltier sensor have been performed. W...
Multi-scale approach for the analysis of the stress fields at a contact edge in fretting fatigue conditions with a crack analogue approach
This paper describes a novel method to model the stress gradient effect in fretting-fatigue. The analysis of the mechanical fields in the proximity of the contact edges allows to extract nonlocal intensity factors...
Can Keff be assumed as the driving force for fatigue crack growth?
This work raises some new questions about the validity of blindly assuming that Elber’s effective stress intensity factor is the actual fatigue crack driving force, and that as so it can be used to explain all loa...
Fatigue crack paths under the influence of changes in stiffness
An important topic of the Collaborative Research Centre TRR 30 of the Deutsche Forschungsgemeinschaft (DFG) is the crack growth behaviour in graded materials. In addition, the growth of cracks in the neighbou...
Duplex S-N fatigue curves: statistical distribution of the transition fatigue life
In recent years, very-high-cycle fatigue (VHCF) behavior of metallic materials has become a major point of interest for researchers and industries. The needs of specific industrial fields (aerospace, mechanical a...