Thermal analysis of baffled shell and tube type EGR cooler for different types of tubes using CFD
Journal Title: International Journal of Engineering Sciences & Research Technology - Year 30, Vol 3, Issue 7
Abstract
Exhaust Gas Recirculation (EGR) technique using EGR cooler reduces the NOx content from the tailpipe emission of Diesel engines. Commercial computational fluid dynamics (CFD) code is used to solve and simulate the flow-fields and temperature distribution of fluids inside the EGR cooler. In this investigation two models (model-a and model-b) of EGR coolers are developed using Pro/Engineer Wildfire 4.0 software. Model-a is a single pass baffled shell and tube heat exchanger with staggered tube arrangement of plain tubes and having conical shaped stationary heads (gas inlet/outlet chamber) [2]. Model-b is having the same tube arrangement and spacing as they were in model-a, but the plain tubes were replaced with internally finned tubes to increase the internal surface area of tubes. The finned tubes are of same outer diameter and same tube material as that of plain tubes. In model-a and model-b, the inlet conditions of both the cooling water and hot gases are the same. These models are analysed with Ansys Fluent 13.0 software. The CFD results show that, by replacing the p
Authors and Affiliations
Ibrahim Hussain Shah1
MORPHOLOGICAL AND STRUCTURAL CHARACTERIZATION OF RF MAGNETRON SPUTTERED ZnO THIN FILMS DEPOSITED AT DIFFERENT SUBSTRATE TEMPERATURES
Zinc oxide (ZnO) thin films were deposited on glass substrates by radio frequency magnetron sputtering using pure zinc oxide target. The effect of substrate temperature on the structural and orphological character...
DESIGNING A MOBILE EYES-FREE SOFT KEYBOARD FOR VISUALLY IMPAIRED IN ANDROID
Typing is the essence of mobile communication and connectivity. Arguably, today’s technologies support mobile text input poorly, though this is the case for everyone, but it is particularly relevant to the visuall...
NUMERICAL SIMULATION OF TRUNCATED PYRAMIDAL CUPS OF AA1050-H18 ALLOY FABRICATED BY SINGLE POINT INCREMENTAL FORMING
The purpose of the present project work was to understand the formability of AA1050-H18 alloy to fabricate truncated pyramidal cups using single point incremental forming (SPIF) process. The finite element analysis has b...
A CARBON DRAIN PRESSURE VESSEL & NOZZLE STRESS ANALYSIS
Due to functional requirement, Nozzle are require for pressure vessel. If these nozzle present on peak of the dishend do not disturb the symmetry of the vessel. However sometimes process requires that nozzles to be...
Agadir Clay Materials as a New Adsorbent to Remove Cationic and Anionic Dyes from Aqueous Solutions
This study investigated the potential use of clay minerals originated from barrage situated in Agadir (Morocco), as a low-cost, natural, eco-friendly and alternative adsorbent for removal of Methylene Blue (MB) an...